- Joined
- May 14, 2018
- Messages
- 1,790
- Reaction score
- 1,090
- Points
- 113
- Location
- Western Mass.
- Vehicle Year
- 1994
- Make / Model
- Ford/Ranger XLT
- Engine Type
- 3.0 V6
- Transmission
- Manual
- 2WD / 4WD
- 2WD
- Tire Size
- 225/70/R15
- My credo
- If it's not broken Don't Fix It!
I changed out the front pads on my 94 2WD 3.0 ranger and I am now getting pad rattle from them so I feel really stupid for asking these questions but the answers are need to know to stop it. When I removed the driver side there was no anti-rattle clip installed and the passenger side clip and pad fell out when I removed the caliper so I could not see how they should be installed.
1. Does the anti rattle clips go on top or the bottom of the inner pad?
I installed them on the bottom tab of the pad but am still getting rattling.
2. Does the tab on the anti-rattle clip go on the slide for the pads or on the outside of the bracket, basically pulling the pad pack towards the caliper piston?
Currently have it on the outside of the bracket pulling the pad towards the piston.
IF you have a pic of how they are installed it would help a bunch in understanding how to install them. I hope I explained clearly enough of what I need if not let me know and I ll try to do better.
1. Does the anti rattle clips go on top or the bottom of the inner pad?
I installed them on the bottom tab of the pad but am still getting rattling.
2. Does the tab on the anti-rattle clip go on the slide for the pads or on the outside of the bracket, basically pulling the pad pack towards the caliper piston?
Currently have it on the outside of the bracket pulling the pad towards the piston.
IF you have a pic of how they are installed it would help a bunch in understanding how to install them. I hope I explained clearly enough of what I need if not let me know and I ll try to do better.