Bionic711
New Member
- Joined
- Feb 10, 2010
- Messages
- 7
- Reaction score
- 0
- Points
- 0
- Vehicle Year
- 1988
- Make / Model
- Ford
- Transmission
- Automatic
Alright, I almost ready to can this truck.
Anywho, here's the Issue, I have an 88 Bronco II that just wants to be a fussy POS. I Have no spark, no plug electricity (tested with a EFI light testing kit), but the thing turns over, Fuel Pump also pressurizes the rail.
Diagnosis, Electrical problem.
Here's my thing, What could possibly, other than the ECA, which is brand new, cause no spark AND no power to the Plugs. The EEC Module tested okay when I got it tested.
Also, I was testing the EEC power relay and the wires came out of the harness, on the bottom are numbers 1-4 on the pins, if anyone can give me the Colors to numbers combo I'd greatly appreciate it. Wire colors should be Black/Light Green, Red/Light Green, Red, and Yellow.
All ideas are welcome.
Anywho, here's the Issue, I have an 88 Bronco II that just wants to be a fussy POS. I Have no spark, no plug electricity (tested with a EFI light testing kit), but the thing turns over, Fuel Pump also pressurizes the rail.
Diagnosis, Electrical problem.
Here's my thing, What could possibly, other than the ECA, which is brand new, cause no spark AND no power to the Plugs. The EEC Module tested okay when I got it tested.
Also, I was testing the EEC power relay and the wires came out of the harness, on the bottom are numbers 1-4 on the pins, if anyone can give me the Colors to numbers combo I'd greatly appreciate it. Wire colors should be Black/Light Green, Red/Light Green, Red, and Yellow.
All ideas are welcome.