85 2.3 efi when it first starts it will idle fine but when you start driving around 2000 rpm it spits and sputters sounds almost like its missing for about 2 min then it snaps out of it and runs like a champ (you feel the power difference) but even after a 3 hour drive if you shut it off and...
i got a 85 2.3 with 4:10s in the rear on the highway going 70 its pounding 35-3700 rpm looking for a good size tire/rim to drop down to around 25/2700 in south dakota its 75 that will be around 37/3800 rpm and im trying to get decent millage for my 1900 mile trip
i have a 85 2.3 ranger and i was wondering if anyone that has a timing light would check what there ignition timing is with the spout connected and let me know. when i unplug my spout and set the timing to 10 degrees then reconnect the spout the timing is at 18 degrees btdc people told me thats...
i have a 85 ranger 2.3 4*2 the person before me put 3.08 gears in and i got it and put 4.10s in now at 75 its running around 3200 rpm is that normal or is that to high and im about to make a trip from oregon to Minnesota would it be bad to run it at 3200 rpm for 1800 miles
i have a 85 ranger 2.3 4*2 it has a m5od that is bad the only rangers that are in my scrap yard are all 2.9 4*2 i dont know what year they are and most of them have a tk5 in them and i would rather have the tk5 my question is are the bell housings the same on a 2.3 and a 2.9 and if not i have a...
i have a m5od 4*2 it shits perfect no noise and goes right into gear but in all gears while im driving theres a sound coming from the transmission its like a slight grinding scratching kind of noise. Its from a scrap yard and i have no clue how many miles are on it when i drained it there where...
i have a 2.3 85 ranger 4*2 with the tk5 and its going out i found a m5odr1 out of 89 ranger 2.3 4*2 will the tk5 master cylinder work with the m5od and is there any wiring problems that i mite run into
i have a 85 2.3 ranger 4*2 it has a Toyo Koygo 5 speed thats going out and i have a M5OD-R1 out of a 89 2.3 4*2 ranger but it has no clutch will the Toyo Koygo clutch and my old flywheel work with the M5OD
i have a 85 ranger 2.3 and when i unplug the spout conector and set my base timing to 10 btdc then tighten the dizzy but when i plug the spout back in the timing jumps to 20 btdc i was wondering if that was normal for these engines but that sounds like alot of advance for idle
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.