Tried to google, didn't come up with anything. My brother is putting a straight axle under my old ranger and my auto hubs don't work. I'm gonna take the manuals it has on it and put them on my new truck. Can I do this? Thanks guys .
So I have a 94 and a 99 I need to put a hitch on I have an exolorer reciever that I want to cut down and weld to be able to fit the frame rails. Is that safe? I dont have a picture of the hitch but its just 2x2 square stock with the brackets welded on the end. I'd probably take it to someone...
Okay so it runs fine when warm but idles rough and dies when cold. i got it to idle decently, but still rough. You can hear an obvious vacuum leak.
i've researched this problem and i've come up with this : the intake manifold "O-rings" need to be replaced. is this the same thing as the upper...
Got a few cosmetic things wrong, needs a new rear bumper and i need a towing package, came with the stock 16's and some older stock 15's painted black. prob gonna go and try and find some stock size mud tires, do they even make them? has a little bit of rust but i do live in michigan and picked...
my trucks a pile. i know it, everyone i know, knows it. :) gonna give it to my brother and let him have fun!
however i'm getting 4000-4500 for a new truck soon.
looking at 98+ rangers with a 4.0, 5 speed, 4x4 ect. maybe even 95+.
found an 02 with 197k miles 4.0 ..automatic though :( but...
not really sure what 100% the name is for it..but it's like the rear diff cover gasket, just for the front differential. would it be fine to just your RTV? Looking on rock auto atm and cannot find it.
so my cab mounts are still wasted making it unsafe to drive and my body isn't in the best shape. to do it the right way i'd have to put a new radiator core support in and my cab is a little too rusty to save so i'm just going to replace the whole cab later on down the road. for now, would it be...
She wouldn't start like normal when i changed the transmission but would start when i jumped the starter solenoid. wouldn't shift out of 4x4 ( was in low, i had to pull the shift motor off and put it into 2wd.) it also won't shift into overdrive. i was getting a check engine but i don't think it...
trying to figure out what my truck would like with a cap, or if someone has a lifted ranger with a cap, that is black, please post it up. i looked it up and all i could find was threads about lifting or threads about caps on stock trucks. -_-
i will provide pictures Soooooooon!
http://detroit.craigslist.org/okl/cto/3434596913.html
It's a 74 Charger 318/automatic for those who are too lazy to copy and paste :)
the guy offered me it for my ranger and since i'm driving my dads truck indefinitely, i might try and grab a project.
i've never done body work before and i'm...
i plan on doing the body mounts as 3 of them are pretty much gone. one is still on..yay. gonna have to do a core support for the front to as the mount up there is missing >:(
If i get these ( http://www.summitracing.com/parts/ptp-6-106) What hardware from here do i need to get (...
Don't know whats wrong, it whines when not moving, it's a really loud whining noise...i just changed the transmission with another. Truck kinda bogs down when put into reverse. Whine goes away at higher speeds. that or i can't hear it. Goes away when revved over 2000 or so rpm....
Found a 94 5 speed 4x4 truck that's been sitting for a year or two for 600. if it's a 4 liter everything should swap on my 93, right? i don't know of any changes but i'm sure there is some...?
Needs a throw out bearing. but i probably would have replaced that anyways...
Uses the same pictures as the previous owner!
http://detroit.craigslist.org/okl/cto/3351218691.html
Previous owners post : http://monroemi.craigslist.org/cto/3258446363.html
i offered him 650 :icon_twisted:
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.