trying to get an idea on how to set my rear suspension up shock wise inboard or the frame I put a bronco gas tank in it so the one stock shock mount don't work anymore thanks
went to replace o ring on overdrive servo cover found the servo was falling apart bought new one now i cant get the cover to go back in feels like its got air pressure behind it no matter how hard i push on it, it wont go is it air tight in behind it ? trans is 94 a4ld 4x4
just looking for some input buddy has one its free and curios as to wether i should attempt to put it in on want 5-6 psi of boost just to get a little more jam out of the motor turbo is a td05 thanks any help is appreciated
well heres the plan with the truck got the conversion brackets off copykat got a dana 44 ttb currently replacing all the bushings once its under ill be making my radius arms thinking of going coils coilovers are also the other option for the rear i have a FW 8.8 converted to discs goin with 4.88...
To run the beams they need to be shortened or pushed outward 1" from stock dana 35 location I know where u can get the brackets so you don't need to cut the beam or shorten your axle shafts
brackets to run 44ttb on your ranger saves you from having to figure out how you will mount the ttb im gona hopefully be ordering a set from this batch need another person to go in on them
how much of a drop pitman arm would you suggest for a 7-8 inch eb 44 lift thanks and also do i need to change the carrier to put 4.88s or 4.56s in or can i get a thick gear
well i ve been putting off working on this truck for a long time now so last week i said screw so here is the start of my halfrunner build i call it a halfrunner because of the BL thats in it for now little bit of background behind it truck was a stock ext cab with 4l it was given to me back in...
i was wondering what you guys did if you have bent a set of beams i know bending them will shorten the wheel base so i could cut and extend them trying to keep the coils. also what is the max they can be bent i just dont want to extend them i'd like to gain some lift or if you got a better idea...
i thought i might as well throw a build thread up on the truck ive had it for a year now and done alot of work to it i bought it looking like this
after it sitting in my driveway for 3 months i finally got motivation to start working on it first thing i did was replace the spring hangers
as you...
well i recently installed a transgo shift kit and tranny dont slip no more it could have been that he VB gaskets were dried out well now i got a new problem go figure now the tranny will go through phases of shifting good to sluggish or the o/d light will flash but all i have to do is turn the...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.