broncobuckinaround
Member
- Joined
- Sep 24, 2012
- Messages
- 432
- Reaction score
- 1
- Points
- 16
- Vehicle Year
- 07/86
- Make / Model
- ford
- Engine Size
- 4.0
- Transmission
- Manual
I'm getting a p0193 code. And I've already done pump, filter, driver module, and rail sensor. Took it to the dealer and let them run their test plan. They came up with a faulty pcm. So I replaced it too. Didn't fix my issue.
According to my scanner on live data. Pressure is 51psi. I haven't checked it yet with a manual guage. And at the pump I'm getting 5 volts which I assume is ok. But the code reads to little or to much fuel. I'm at wits end here and I have til August 2nd to take it back to the dealer for them to try again. Any help would be awesome.
According to my scanner on live data. Pressure is 51psi. I haven't checked it yet with a manual guage. And at the pump I'm getting 5 volts which I assume is ok. But the code reads to little or to much fuel. I'm at wits end here and I have til August 2nd to take it back to the dealer for them to try again. Any help would be awesome.