The Ranger Station Forums

The Ranger Station Forums (http://www.therangerstation.com/forums/index.php)
-   4-Cylinder (2000 & Older) (http://www.therangerstation.com/forums/forumdisplay.php?f=84)
-   -   oil pressure sensor location (http://www.therangerstation.com/forums/showthread.php?t=94673)

escort_gts 10-27-2010 08:40 PM

oil pressure sensor location
 
Anyone know where the oil pressure sensor on a 89 2.3 is? Having problems trying to find it. There is just to much stuff in the way under the intake to locate it.
The gauge has stoped working and I need to see if it is the sensor, gauge, fuse,or I just lost all oil pressure together.

scotts90ranger 10-27-2010 09:04 PM

directly behind the #4 intake port and slightly below.

escort_gts 10-28-2010 08:28 PM

Ok, I figured that was the water temp. Thanks for the help

scotts90ranger 10-28-2010 09:16 PM

water temp is just above and behind the oil filter

escort_gts 10-29-2010 08:55 AM

ok, how about the water temp switch?

scotts90ranger 10-29-2010 09:13 PM

that is the gage sensor, the computer sensor is on the top of the intake manifold by the fuel injectors.

dubluvv 11-07-2010 08:43 PM

Are these locations the same for a '91 2.3L? I just bought a oil pressure and water temp gauge kit and am looking to hook them up.

Thanks!
Mitch

steve63 11-07-2010 11:25 PM

there at the same places on my 90,so they should be pretty close as 89-92 are very simular.

scotts90ranger 11-08-2010 10:37 PM

the locations in the block/head for the gage sensors are the same for all 2.0/2.3/2.5's

escort_gts 11-17-2010 06:24 PM

Quote:

Originally Posted by scotts90ranger (Post 845999)
that is the gage sensor, the computer sensor is on the top of the intake manifold by the fuel injectors.

is it the one that is on the number 1 intake, or in the middle between 2 and 3?


All times are GMT -5. The time now is 03:48 AM.

1999-2018 / 959 Media LLC / All Rights Reserved