Welcome Visitor! Please take a few seconds and larry123
New Member
- Joined
- Aug 12, 2015
- Messages
- 1
- Reaction score
- 0
- Points
- 0
- Vehicle Year
- 1994
- Make / Model
- ford
- Transmission
- Manual
1994 ranger 2.3 liter
was mising on number three cylinder
new coil, new icm,
found a bad plug wire. now truck runs fairly well but now #3 cylinder is firing on the exhaust side but not on intake side.
one coil is not producing spark on the #3 tower but is on the #2 tower.
it has a new coil and have swapped coils. but #3 still does not fire at the coil
what could be the problem. the signal wire flashes like it is supposed to for #2#3 side and it flashes for the #1 #4 side. so what gives. can anyone help me
was mising on number three cylinder
new coil, new icm,
found a bad plug wire. now truck runs fairly well but now #3 cylinder is firing on the exhaust side but not on intake side.
one coil is not producing spark on the #3 tower but is on the #2 tower.
it has a new coil and have swapped coils. but #3 still does not fire at the coil
what could be the problem. the signal wire flashes like it is supposed to for #2#3 side and it flashes for the #1 #4 side. so what gives. can anyone help me
