Welcome Visitor! Please take a few seconds and 
swynx
Active Member
- Joined
- Mar 26, 2008
- Messages
- 2,401
- Reaction score
- 9
- Points
- 38
- Age
- 31
- Location
- lewiston idaho
- Vehicle Year
- 1994
- Make / Model
- Mazda
- Engine Size
- 4.0
- Transmission
- Manual
working on a 89 chevy with a 350, the blinkers on the drivers side blink untill you turn the lights on (running lights or driving lights), then it quits blinking and the light goes solid. replaced the bulbs and noticed that its not using both filaments when switching the lights on, it just turns the filament that blinks to a solid.
the thing the lights mounts in is kinda messed up and if you push one bulb sideways it quits working all together. ive traced all the wiring till it dissapears and havent noticed any modications or bare spots in the wiring, it looks original.
the thing the lights mounts in is kinda messed up and if you push one bulb sideways it quits working all together. ive traced all the wiring till it dissapears and havent noticed any modications or bare spots in the wiring, it looks original.
) and was bridging the two filaments.
