RangerSVT
Oct 09 OTOTM
Article Contributor
V8 Engine Swap
OTOTM Winner
Solid Axle Swap
RBV's on Boost
ASE Certified Tech
TRS Banner 2010-2011
TRS Banner 2012-2015
- Joined
- Mar 15, 2009
- Messages
- 7,883
- Reaction score
- 53
- Points
- 48
- Location
- TRS since 2002 - NW KY
- Vehicle Year
- 19962002
- Make / Model
- Ford
- Engine Size
- GT-40 5.0L EFI W/AC
- Transmission
- Automatic
So I'm in the planning stages of SVT's next phase. I'm building a new suspension, and along with that a new foundation to build off of, a new frame. My current weight is about 7k, with the new axles I'm expecting at least 8k. I'm looking to lose a few pounds with the new frame. My choices are 2x4x3/16 rectangle tubing, or 1.75x.120 dom, double tube frame. Dom is about 2.1 lbs per foot, rectangle tubing is about 6.8 lbs per foot. In the end, I'm looking at about 4.5 lbs per foot for the dom, and 6.8 lbs for rectangle. My question is, do you think the dom will be strong enough to support the rig? Axles are about 1300 lbs each, plus rims & tires, engine power will start as 400hp, but will increase as high as 1,000hp in the future. What say you?
SVT
SVT