Jbrown1238
Member
- Joined
- Sep 3, 2010
- Messages
- 691
- Reaction score
- 6
- Points
- 18
- Location
- Largo, Fl
- Vehicle Year
- 2003
- Make / Model
- Ford
- Engine Size
- 306
- Transmission
- Manual
- My credo
- None
As the test fire date moves closer I thought I would knock a few items off the task list and experiment with posting video. I have never posted a video on a website before and wanted to be prepared when the time comes to start the truck. Today one of the task items included priming the oil system and installing the new cam positioning sensor. I started at TDC and ran the electric drill with the priming tool for about 30-45 seconds, then stopped for about 15 seconds and ran it again for another 25 seconds. Then I rotated the engine 1/4 turn and repeated the process until the engine had been turned a full revolution and the system had been fully primed. I attached a link with a short video below.
http://vid256.photobucket.com/albums/hh168/jbrown1238/IMG_0933_zpshs2m95y1.mp4
http://vid256.photobucket.com/albums/hh168/jbrown1238/IMG_0933_zpshs2m95y1.mp4