Welcome Visitor! Please take a few seconds and 
Grunizzle
01/2013 OTOTM Winner
U.S. Military - Active
V8 Engine Swap
OTOTM Winner
Solid Axle Swap
TRS 20th Anniversary
- Joined
- Jan 20, 2009
- Messages
- 1,252
- Reaction score
- 3
- Points
- 38
- Location
- Albuquerque, NM
- Vehicle Year
- 1991
- Make / Model
- Ford
- Engine Size
- 4.0L V-6
- Transmission
- Manual
Well I finally got a lot of work done on the truck, only 35 days left until Moab!
First cutting off the existing tube work and sliders from the truck. I didn't design the original stuff with a full exo in mind so it all needed to be changed. I also cut off the spring and shackle hangers.
Next we put the 9 inch under it, in-boarded the leafs to sit under the frame rails and moved the axle forward to set my wheelbase at 117''.
I got the atlas installed as well
And here is how it sits now. That is my friends suburban we have been working on as well, It just got a 6.0 swap from a Denali, a lift and working on dove nose and armor now.
Coming in the next week is the tube for the exo and the new sliders I have to make and weld on. Then it is just some small prep work for moab.
First cutting off the existing tube work and sliders from the truck. I didn't design the original stuff with a full exo in mind so it all needed to be changed. I also cut off the spring and shackle hangers.
Next we put the 9 inch under it, in-boarded the leafs to sit under the frame rails and moved the axle forward to set my wheelbase at 117''.
I got the atlas installed as well
And here is how it sits now. That is my friends suburban we have been working on as well, It just got a 6.0 swap from a Denali, a lift and working on dove nose and armor now.
Coming in the next week is the tube for the exo and the new sliders I have to make and weld on. Then it is just some small prep work for moab.
