Dubis
New Member
- Joined
- Apr 12, 2016
- Messages
- 13
- Reaction score
- 0
- Points
- 0
- Location
- Madawaska Maine
- Vehicle Year
- 1998
- Make / Model
- Ford
- Engine Size
- 3.0 V6
- Transmission
- Automatic
Alright so i have a project truck that i'm working on, it is a rwd 3.0 v6 ranger 1998 XLT model. All i have left is 1 bolt left on the belt housing on the top and the transmission fluid dipstick is right in my way. I tried unscrewing it like someone said but that didn't work at all. I dont have a long enough extension with an impact to get it from the bottom and i tried connecting 2 wrenches together and tried to torque on it but it wont budge, cant fit a breaker bar or anything, I tried wd40ing it too. What would be the best thing to do for that? Someone also said i have to disconnect the transmission coolant lines and remove them completely, i just removed them from the radiator and moved them out of the way, he said they would become dented. I'm only 14 and I've been doing this by myself the whole time with a lack of tools but now I have a motor crane ready for use and I'm obviously going to need2 ppl to pull it so i can guide it out carefully. But the ranger's also on my lawn so how do you think i could pull it without it sinking right in the mud? i could air up the tires real quick and move it with my sister's sierra 1500 and put it right in the driveway but if i couldnt move it back (like if the newer motor was junk) she would probably get pissed off lol. But also another thing is, am i going to have to use the wiring diagram from the blown motor? the blown one is 1998 and the one i'm putting in is from a 1994. Srry for making a big ass post but this site is the whole reason i'm able to do all this myself.
Almost done tho!![Headbang :headbang: :headbang:](http://www.therangerstation.com/forums/images/smilies/headbang.gif)
Almost done tho!
![Headbang :headbang: :headbang:](http://www.therangerstation.com/forums/images/smilies/headbang.gif)