- Joined
- Feb 25, 2008
- Messages
- 694
- Reaction score
- 1
- Points
- 0
- Location
- Barrie, Ontario, Canada
- Vehicle Year
- 1997 , 1992
- Make / Model
- Ford , Ford
- Engine Size
- 7.3L , 4L
- Transmission
- Manual
alright well ive search the whole site an read all the bypass threads an still cant figure out how to bypass the clutch switch on my truck. it says theres 2 wires at the switch but my 1992 ford ranger 4 L manual, has 6 wires (red/lt Blue, pink, green, lite blue, white/ red, blue/yellow) what wires do i cross to bypass this?
the small wire on the top of the starter relay i was checking continuity to find where that wire goes an i found that it goes to a connector in the cab but its a red/white wire not the red/lt blue thats on the relay an then there is not wiring coming out of that connecter where the red/white wire goes in? so am i missing something that wont let my truck start?. or to make things easier how do i wire up a 2 way toggle switch to that post on the relay so i can manual start the starter?
the small wire on the top of the starter relay i was checking continuity to find where that wire goes an i found that it goes to a connector in the cab but its a red/white wire not the red/lt blue thats on the relay an then there is not wiring coming out of that connecter where the red/white wire goes in? so am i missing something that wont let my truck start?. or to make things easier how do i wire up a 2 way toggle switch to that post on the relay so i can manual start the starter?