- Joined
- Aug 9, 2007
- Messages
- 2,177
- Reaction score
- 20
- Points
- 38
- Age
- 39
- Location
- auburn/minot maine
- Vehicle Year
- 1987/1990
- Make / Model
- fords and only
- Transmission
- Manual
88 b2 2.9 with 4.0 rad
First time I did this.i pulled a large truck across the yard with deep snow.kept it revved at 3g RPM sometimes went to 3.5g RPM. Then I blew a heater core hose, changed to the heater hose and core.
Second time. Lots of deep snow in the yard. No plow truck. Had to use winch and tires to cut snow. Again engine revved at 3g. Truck boils but does not boil over?
3rd time. Ran for about 45min also used winch to pull atv out of a snow bank. It Got very warm. I want to say 85%.
So could this be a cracked head on it's way?
First time I did this.i pulled a large truck across the yard with deep snow.kept it revved at 3g RPM sometimes went to 3.5g RPM. Then I blew a heater core hose, changed to the heater hose and core.
Second time. Lots of deep snow in the yard. No plow truck. Had to use winch and tires to cut snow. Again engine revved at 3g. Truck boils but does not boil over?
3rd time. Ran for about 45min also used winch to pull atv out of a snow bank. It Got very warm. I want to say 85%.
So could this be a cracked head on it's way?