• Welcome Visitor! Please take a few seconds and Register for our forum. Even if you don't want to post, you can still 'Like' and react to posts.

Propane - Need info


Jim Oaks

Just some guy with a website
Administrator
Founder / Site Owner
Supporting Vendor
Article Contributor
TRS Banner 2010-2011
TRS Banner 2012-2015
TRS 20th Anniversary
VAGABOND
TRS Event Participant
GMRS Radio License
Joined
Aug 2, 2000
Messages
13,407
Reaction score
8,527
Points
113
Location
Nocona, Texas
Vehicle Year
1996 / 2021
Make / Model
Ford Ranger
Engine Type
4.0 V6
Engine Size
4.0 / 2.3 Ecoboost
Transmission
Automatic
2WD / 4WD
4WD
Total Lift
6-inches
Tire Size
33x12.50x15
Hey guys, I need some info on propane.

http://www.gotpropane.com offers a kit, but it's over $1,000.

One of the pains in doing an engine swap in a off-road truck is dealing with fuel injection. Engine swaps use to be so much easier when things were carbed, but it seems you just gotta have FI to be happy on inclines.

Supposedly propane is like fuel injection and happy at odd angles unlike a carb. So the issue is, what is involved in putting propane on a motor that has a carbureted intake? Can you source the parts yourself without shelling out $1,000+ on a kit? Is this a bolt on application?
 


Chris.S.

Member
Joined
May 5, 2008
Messages
744
Reaction score
4
Points
18
Age
46
Location
Kelowna, BC
Vehicle Year
2010
Make / Model
Ford
Engine Size
4.0
Transmission
Automatic
If I can thread jack a little, I've always wondered what the advantage of propane is? Cheaper to run maybe?
 

Jspafford

Logan Andrew Feb 17, 2012
V8 Engine Swap
TRS Banner 2010-2011
Joined
Jan 2, 2001
Messages
8,012
Reaction score
15
Points
38
Age
40
Location
Lancaster, Ohio
Vehicle Year
2016
Make / Model
Chevy 3500HD
Engine Type
V8
Engine Size
6.6L
Transmission
Automatic
2WD / 4WD
4WD
Total Lift
5"
Tire Size
35"
We currently sell propane at $3.95 a gallon... Don't think it's any cheaper.
 

Will

Forum Staff Member
TRS Forum Moderator
Joined
Nov 30, 2001
Messages
6,925
Reaction score
514
Points
113
Location
Gnaw Bone, Indiana
Vehicle Year
2007
Make / Model
Toyota
Engine Size
4.0
Transmission
Manual
It's known all around the world as cooking gas.

Fuel injection is simple. And it's definately worth studying on.
 

colinrmitchell

Feels good, man.
OTOTM Winner
Solid Axle Swap
Joined
Nov 15, 2007
Messages
418
Reaction score
4
Points
0
Age
39
Location
Copley, Ohio.
Vehicle Year
1997
Make / Model
Ford
Engine Size
2.3L
Transmission
Automatic
I found this info, which may or may not help:

Burning gasoline: 46 kilojoules per gram
Propane: 50 kilojoules per gram

Of course, the ideal mixture of gasoline air-to-fuel is 14.7:1 I found that propane will not burn unless it is mixed with air at 2.15 to 9.6%.

So it seems that gasoline would be easier and more efficient to burn, not considering extreme-angle off-roading.

I doubt any of this helps, but I drove some propane-powered tow motors in a shop for a little while and though that it would be REALLY cool to make my truck propane powered. As another question, if anyone knows, is this emissions-legal in Ohio for road vehicles?

Finally, to be an idiot, who will be the first to burn nitromethane in their Ranger??:icon_twisted:
 
Last edited:

Ozwynn

Well-Known Member
U.S. Military - Veteran
Joined
Aug 6, 2007
Messages
6,505
Reaction score
200
Points
63
Age
47
Location
Berrien Springs, MI
Vehicle Year
2022
Make / Model
RE Interceptor
Transmission
Manual
My credo
If you can't go through it or around it, then go over it.
it is emissions legal but it won't work that well with fuel injection. you are right about the efficiency. on Liquid Propane you will get around 75% of the power and 75% of the mileage.
 

85_Ranger4x4

Forum Staff Member
TRS Event Staff
TRS Forum Moderator
Article Contributor
V8 Engine Swap
OTOTM Winner
TRS Banner 2010-2011
TRS 20th Anniversary
VAGABOND
TRS Event Participant
Joined
Aug 7, 2007
Messages
32,193
Reaction score
17,495
Points
113
Location
SW Iowa
Vehicle Year
1985
Make / Model
Ford
Engine Type
V8
Engine Size
5.0
Transmission
Manual
It leaves the engine freaky clean, tear it down to work on it and they are SPOTLESS inside.

Propane tractors usually made comparable if not a tad more power than the same model with a gas engine, but they had a higher performance engine (more compression, better heads/manifolds...)
 

AllanD

TRS Technical Staff
TRS Technical Advisor
Joined
Jun 1, 2001
Messages
7,897
Reaction score
134
Points
63
Age
62
Location
East-Central Pennsylvania
Vehicle Year
1987... sorta
Make / Model
Ford
Engine Size
'93 4.0
Transmission
Manual
Per Lb propane has slightly less energy than gasoline,
but because of it's higher Octane rating you can run
higher compression and get some or most of that back.

Frankly, fuel injection isn't that big a deal you just need
to have proper documentation (manuals)

Once it's in, set-up and running actual problems are rare.

AD
 

armyets2003

New Member
Joined
Aug 12, 2007
Messages
14
Reaction score
0
Points
0
Location
Oklahoma
Vehicle Year
1987
Make / Model
Ford
Engine Size
2.9L
Transmission
Manual
If its a true carbed motor then its easy to swap it to propane its basically all bolt on stuff. You can source your own parts, if you look around some of you local junk yards it is possible to find complete systems. It basically consists of the tank, a "converter" that converts the Liquid to gas and then holds it until the engine pulls it out with vacuum, the "hat" w/adapter that bolts to the top of the carb, and the hoses. I have propane on my 87 2.9, the early FI tolerates the propane very well the kit is for a carbed motor but i had an adapter for the hat made so i could attach it to the end of the intake hose. Im no expert but if you want more info ill answer what i can.

Shawn
 

killacal

New Member
Joined
Jan 25, 2009
Messages
65
Reaction score
0
Points
0
Location
Randolph, MA
Transmission
Automatic
Per Lb propane has slightly less energy than gasoline,
but because of it's higher Octane rating you can run
higher compression and get some or most of that back.

Frankly, fuel injection isn't that big a deal you just need
to have proper documentation (manuals)

Once it's in, set-up and running actual problems are rare.

AD
The low intake charge temperatures make propane an ideal candidate for a supercharged or turbocharged setup. The low intake temps also allow you to throw more timing into any combination yielding at least the same power, and in many cases more.

Turbo mustangs has had some great write ups showing the potential of a propane setup which are definitely worth the read if you want to know more about it.
 

snoranger

Professional money waster
TRS Event Staff
TRS Forum Moderator
Supporting Member
Article Contributor
RBV's on Boost
ASE Certified Tech
VAGABOND
TRS Event Participant
GMRS Radio License
Joined
Nov 25, 2007
Messages
13,052
Reaction score
13,523
Points
113
Location
Jackson, NJ
Vehicle Year
'79,'94,'02,'23
Make / Model
All Fords
Engine Type
2.3 EcoBoost
Transmission
Automatic
2WD / 4WD
4WD
My credo
I didn't ask for your life story, just answer the question!
Hey guys, I need some info on propane.

http://www.gotpropane.com offers a kit, but it's over $1,000.

One of the pains in doing an engine swap in a off-road truck is dealing with fuel injection. Engine swaps use to be so much easier when things were carbed, but it seems you just gotta have FI to be happy on inclines.

Supposedly propane is like fuel injection and happy at odd angles unlike a carb. So the issue is, what is involved in putting propane on a motor that has a carbureted intake? Can you source the parts yourself without shelling out $1,000+ on a kit? Is this a bolt on application?
Your gonna need a carb, a regulator/vaporizer/converter (different companies use different names, they all do the same thing.) , a fuel shut-off (either vacuum lock-off or electrical), a hydrostatic relief valve, a tank and mounting brkt, a rego coupler (if you want to use forklift tanks and have them removable), and a lower temp t-stat.

For the carb, regulator, and vacuum lock-off, id go with Impco products. ive got 10+ years experience with propane engines, and impco is the best out there.

BTW: converting an engine to propane there will be approx a 12-15% power loss from gas (if the A/f and timing is adjusted properly), unless the compression ratio is raised (in which case, the engine CAN make the same or more power)
 

JFA_Spyderman

Member
Law Enforcement
TRS Banner 2010-2011
TRS Banner 2012-2015
Joined
Aug 8, 2007
Messages
512
Reaction score
3
Points
18
Age
39
Location
Whidbey Island, Wa.
Yo,
We are retailing propane at $2.39/gal right now. I would be interested in converting, if nothing else, maybe just to change my oil every 10K miles.
 

Lifted2x

New Member
Joined
Sep 30, 2007
Messages
103
Reaction score
0
Points
0
Location
Medford, OR
Vehicle Year
1994
Make / Model
Ford
Engine Size
4.0
Transmission
Manual
My old 2.8 is propane only, and I get it the local gas station for 1.75 a gallon. Mine is converted using forklift parts and it runs good but there is some power loss, mainly because my vaporizer and carb are only rated for 100hp. It is awesome off road never stumbles, super fast throttle response. Starts easy even when its below freezing. I think its a good upgrade from a carb. I noticed there is a huge price variation from station to station, 1.75 the cheapest up to 3.75 at some places.
 

Lifted2x

New Member
Joined
Sep 30, 2007
Messages
103
Reaction score
0
Points
0
Location
Medford, OR
Vehicle Year
1994
Make / Model
Ford
Engine Size
4.0
Transmission
Manual
Oh and Ebay has almost everything you need search impco and all kinds of parts come up.
 

dangerranger83

5.0 HO under the hood!!!
Supporting Member
V8 Engine Swap
Solid Axle Swap
Joined
Apr 26, 2009
Messages
7,738
Reaction score
54
Points
0
Location
Lafayette, IN
Vehicle Year
1983
Make / Model
Ford
Engine Size
5.0 HO carbed with an np435 and np208
Transmission
Manual
Got pics. of your propane set up Lifted2x? That would be great to add to this thread.
 

Sponsored Ad


Sponsored Ad

Staff online

Member & Vendor Upgrades

For a small yearly donation, you can support this forum and receive a 'Supporting Member' banner, or become a 'Supporting Vendor' and promote your products here. Click the banner to find out how.

Truck of The Month


Kirby N.
March Truck of The Month

Recently Featured

Want to see your truck here? Share your photos and details in the forum.

Follow TRS On Instagram

TRS Events

25th Anniversary Sponsors

Check Out The TRS Store


Sponsored Ad


Sponsored Ad

Sponsored Ad


Amazon Deals

Top