dirty jersey ranger
New Member
- Joined
- Sep 21, 2015
- Messages
- 6
- Reaction score
- 0
- Points
- 0
- Vehicle Year
- 2002
- Make / Model
- ford
- Transmission
- Manual
so i just finished replacing my clutch slave cylinder TOB and pilot bearing.
i did all this because i was getting rattling noise one that would go away once the clutch pedal was depressed ( tell tail indication that my TOB is bad) well once the tranny was down i inspected the TOB and yes it was bad very bad. reinstalled every thing started it up and boom the noise is still there not as loud but still consistent with what it was before the replacement.
I am running low on things it could be , any help would be appreciated .
Ford Ranger 4.0 v6 5speed m5od tranny .
i did all this because i was getting rattling noise one that would go away once the clutch pedal was depressed ( tell tail indication that my TOB is bad) well once the tranny was down i inspected the TOB and yes it was bad very bad. reinstalled every thing started it up and boom the noise is still there not as loud but still consistent with what it was before the replacement.
I am running low on things it could be , any help would be appreciated .
Ford Ranger 4.0 v6 5speed m5od tranny .