• Welcome Visitor! Please take a few seconds and Register for our forum. Even if you don't want to post, you can still 'Like' and react to posts.

Tool or Wrench for Seat Removal


wildbill23c

Well-Known Member
U.S. Military - Veteran
TRS Banner 2012-2015
TRS 20th Anniversary
Ham Radio Operator
Joined
Aug 22, 2012
Messages
3,917
Reaction score
577
Points
113
Location
Southwestern Idaho
Vehicle Year
1987
Make / Model
Ford Ranger
Engine Type
2.9 V6
Transmission
Manual
2WD / 4WD
2WD
Total Lift
0
Total Drop
0
Tire Size
215/70-R14
My credo
19K, 19D, 92Y, 88M, 91F....OIF-III (2004-2005)
Does anyone know what wrench or tool is needed to get those stupid bolts out of the seats in a 1993 Ford Explorer? The bolts that hold the front of the seats in were 1/2", got to the back and realized the rear bolts are some form of a Torx bit I assume but I've never seen a Torx bit that large, and of course I don't own one so I wasted a trip to the pick a part today as a result and in the process got all the way back home and realized I left one of my tool pouches over there which is full of all the socket & bit adapters :bawling:.
 


Doofy

Member
Supporting Member
U.S. Military - Veteran
Joined
Jul 27, 2008
Messages
947
Reaction score
7
Points
18
Location
Alaska
Vehicle Year
1998
Make / Model
Ford
Engine Size
3.0
Transmission
Manual
My credo
Shit Happens...Then You Die.
Thought they were a #50 Torx. Could be wrong.
 

wildbill23c

Well-Known Member
U.S. Military - Veteran
TRS Banner 2012-2015
TRS 20th Anniversary
Ham Radio Operator
Joined
Aug 22, 2012
Messages
3,917
Reaction score
577
Points
113
Location
Southwestern Idaho
Vehicle Year
1987
Make / Model
Ford Ranger
Engine Type
2.9 V6
Transmission
Manual
2WD / 4WD
2WD
Total Lift
0
Total Drop
0
Tire Size
215/70-R14
My credo
19K, 19D, 92Y, 88M, 91F....OIF-III (2004-2005)
IDK, but hoping someone didn't grab them as I'm going to take some other tools and get them tomorrow if they are still there. And hope my tool bag is still in there, it must have fallen under the other seat.
 

JoshT

Well-Known Member
Supporting Member
V8 Engine Swap
TRS Banner 2012-2015
Joined
Aug 6, 2007
Messages
3,835
Reaction score
1,669
Points
113
Location
Macon/Fort Valley, GA
Vehicle Year
1999
Make / Model
Ford
Engine Type
V8
Transmission
Automatic
2WD / 4WD
4WD
It's a Torx. Been a while since I pulled any, but I want to say it's either a T50 or a T55. I've got both and I want to say that one sizeof for the seats and the other is for bed bolts, but can't recall which is which.
 

wildbill23c

Well-Known Member
U.S. Military - Veteran
TRS Banner 2012-2015
TRS 20th Anniversary
Ham Radio Operator
Joined
Aug 22, 2012
Messages
3,917
Reaction score
577
Points
113
Location
Southwestern Idaho
Vehicle Year
1987
Make / Model
Ford Ranger
Engine Type
2.9 V6
Transmission
Manual
2WD / 4WD
2WD
Total Lift
0
Total Drop
0
Tire Size
215/70-R14
My credo
19K, 19D, 92Y, 88M, 91F....OIF-III (2004-2005)
It's a Torx. Been a while since I pulled any, but I want to say it's either a T50 or a T55. I've got both and I want to say that one sizeof for the seats and the other is for bed bolts, but can't recall which is which.
I don't have either, so I guess I'll throw the easy out in and get them out that way LOL. I have all sorts of bolts, may try the hardware store tomorrow before heading over and see if they have any larger torx bits than the sets I have.
 

ericbphoto

Overlander in development
TRS Event Staff
TRS Forum Moderator
Supporting Member
U.S. Military - Veteran
TRS 20th Anniversary
VAGABOND
TRS Event Participant
GMRS Radio License
Joined
Feb 7, 2016
Messages
15,297
Reaction score
16,528
Points
113
Age
59
Location
Wellford, SC
Vehicle Year
1993
Make / Model
Ford Ranger
Engine Type
3.0 V6
Engine Size
3.0L
Transmission
Manual
2WD / 4WD
4WD
Total Lift
6"
Tire Size
35"
My credo
In theory, theory and practice are the same. In practice, they are different.
The auto parts places have those. Advance even carries Gear wrench brand. Avoid the cheap ones. They will round off when trying to get really stuck fasteners loose.

Sent from my SM-G920V using Tapatalk
 

wildbill23c

Well-Known Member
U.S. Military - Veteran
TRS Banner 2012-2015
TRS 20th Anniversary
Ham Radio Operator
Joined
Aug 22, 2012
Messages
3,917
Reaction score
577
Points
113
Location
Southwestern Idaho
Vehicle Year
1987
Make / Model
Ford Ranger
Engine Type
2.9 V6
Transmission
Manual
2WD / 4WD
2WD
Total Lift
0
Total Drop
0
Tire Size
215/70-R14
My credo
19K, 19D, 92Y, 88M, 91F....OIF-III (2004-2005)
The auto parts places have those. Advance even carries Gear wrench brand. Avoid the cheap ones. They will round off when trying to get really stuck fasteners loose.

Sent from my SM-G920V using Tapatalk
Auto parts stores here in town don't have a clue, just took my easy out set over and got the seats out. However in doing so I found something out about the new Dewalt 20V tools...I managed to get 4 bad batteries and 2 bad chargers, I'm far from impressed with them right now, luckily I brought along my 10 year old 18V tools they got the job done.

Just a warning don't leave home trusting your new 20V Dewalt tools you may wind up getting extremely pissed off and throwing them when the supposedly freshly charged battery is actually dead.
 

Doofy

Member
Supporting Member
U.S. Military - Veteran
Joined
Jul 27, 2008
Messages
947
Reaction score
7
Points
18
Location
Alaska
Vehicle Year
1998
Make / Model
Ford
Engine Size
3.0
Transmission
Manual
My credo
Shit Happens...Then You Die.
My go-to tools are the 18 volt Makita impact driver and the 1/2" drill. Never been a Dewalt can. Glad the easy-outs worked.
 

wildbill23c

Well-Known Member
U.S. Military - Veteran
TRS Banner 2012-2015
TRS 20th Anniversary
Ham Radio Operator
Joined
Aug 22, 2012
Messages
3,917
Reaction score
577
Points
113
Location
Southwestern Idaho
Vehicle Year
1987
Make / Model
Ford Ranger
Engine Type
2.9 V6
Transmission
Manual
2WD / 4WD
2WD
Total Lift
0
Total Drop
0
Tire Size
215/70-R14
My credo
19K, 19D, 92Y, 88M, 91F....OIF-III (2004-2005)
My go-to tools are the 18 volt Makita impact driver and the 1/2" drill. Never been a Dewalt can. Glad the easy-outs worked.
My 18V Dewalt tools have been flawless, last year the batteries started failing, but that was with 8 years of hard every day use with them, so it was understandable. I may just take them all down to batteries plus and have them rebuilt for $40 each and have the larger capacity cells put in them.

We use Makita at work and they work great as well, but seems like a better selection of Dewalt stuff here so that's why I've stuck with Dewalt.

Easy out worked great, I'll figure out the bolt replacement later, all I wanted was to at least get the seats while they were still there. Got both front seats for $39, pretty good deal, one of the seats has a seat cover still on it, looked like both seats probably did at one point as they are in really good shape, a bit dirty which is easy to take care of with some cleaning. They match the interior of my B2 which is why I wanted them.
 
Last edited:

JoshT

Well-Known Member
Supporting Member
V8 Engine Swap
TRS Banner 2012-2015
Joined
Aug 6, 2007
Messages
3,835
Reaction score
1,669
Points
113
Location
Macon/Fort Valley, GA
Vehicle Year
1999
Make / Model
Ford
Engine Type
V8
Transmission
Automatic
2WD / 4WD
4WD
Did you manage to recover your lost tools?
 

wildbill23c

Well-Known Member
U.S. Military - Veteran
TRS Banner 2012-2015
TRS 20th Anniversary
Ham Radio Operator
Joined
Aug 22, 2012
Messages
3,917
Reaction score
577
Points
113
Location
Southwestern Idaho
Vehicle Year
1987
Make / Model
Ford Ranger
Engine Type
2.9 V6
Transmission
Manual
2WD / 4WD
2WD
Total Lift
0
Total Drop
0
Tire Size
215/70-R14
My credo
19K, 19D, 92Y, 88M, 91F....OIF-III (2004-2005)
Nope, they were of course already gone by the time I got back there today. No huge loss they were cheap HF stuff, but still, money out of my pocket.
 

ericbphoto

Overlander in development
TRS Event Staff
TRS Forum Moderator
Supporting Member
U.S. Military - Veteran
TRS 20th Anniversary
VAGABOND
TRS Event Participant
GMRS Radio License
Joined
Feb 7, 2016
Messages
15,297
Reaction score
16,528
Points
113
Age
59
Location
Wellford, SC
Vehicle Year
1993
Make / Model
Ford Ranger
Engine Type
3.0 V6
Engine Size
3.0L
Transmission
Manual
2WD / 4WD
4WD
Total Lift
6"
Tire Size
35"
My credo
In theory, theory and practice are the same. In practice, they are different.
That's a pain. I hate losing tools - any tools. I'm kind of OCD about that.

The JY's I go to around here have wheelbarrows for customers to use. I get one every time and keep my tool bags in the wheelbarrow until I leave. Take a tool out to get a part. Then put it right back in the bag. If I loan a tool, I stand right beside the people using it until they're finished.

Yes. I'm a bit nuts.

Sent from my SM-G920V using Tapatalk
 

JoshT

Well-Known Member
Supporting Member
V8 Engine Swap
TRS Banner 2012-2015
Joined
Aug 6, 2007
Messages
3,835
Reaction score
1,669
Points
113
Location
Macon/Fort Valley, GA
Vehicle Year
1999
Make / Model
Ford
Engine Type
V8
Transmission
Automatic
2WD / 4WD
4WD
Don't feel bad about that. I'm not good with tools at home, but when at the P-N-P I'm anal about it.

Don't have any local P-N-Ps, but there are a few out of town that I visit once or twice a year. It's about a 2 hour drive to the nearest one, and about a half hour between each of the three, so I don't really have enough time to find what I'm after. I won't loan tools, and I act like a grumpy asshole (not difficult) while there to discourage anyone from asking. I hate being that way, but I don't know anyone there, and will probably never see them again.

I won't even use the provided wheelbarrows. They are about useless. The ones with solid tires are always in use, and the ones with pneumatic tires are always nearly flat. Instead my dad has a 4 wheeled cart that he uses for his generators. Normally it's unused so I borrow it, so much nicer to drag it around. Could stand to have slightly larger tires, but it's free to use and does the job.
 

wildbill23c

Well-Known Member
U.S. Military - Veteran
TRS Banner 2012-2015
TRS 20th Anniversary
Ham Radio Operator
Joined
Aug 22, 2012
Messages
3,917
Reaction score
577
Points
113
Location
Southwestern Idaho
Vehicle Year
1987
Make / Model
Ford Ranger
Engine Type
2.9 V6
Transmission
Manual
2WD / 4WD
2WD
Total Lift
0
Total Drop
0
Tire Size
215/70-R14
My credo
19K, 19D, 92Y, 88M, 91F....OIF-III (2004-2005)
I will have to replace the tools I lost, but not as concerned about that right now, so many other things to worry about and deal with LOL. Course now that I've lost those tools I'll need them for something in the near future, otherwise if I still had them they'd sit in the toolbox forever.

The Pick A Parts here have pretty descent wheelbarrows all with flat free tires, but one of those wagons with big tires would sure be nice though.
 

Mark_88

Well-Known Member
Joined
Aug 11, 2007
Messages
18,554
Reaction score
240
Points
63
Age
68
Location
Ontario, Canada
Vehicle Year
2007
Make / Model
Dordge
Engine Size
3.3 Fuel Injected
Transmission
Automatic
My credo
Love Thy Neighbor
My 18V Dewalt tools have been flawless, last year the batteries started failing, but that was with 8 years of hard every day use with them, so it was understandable. I may just take them all down to batteries plus and have them rebuilt for $40 each and have the larger capacity cells put in them.

We use Makita at work and they work great as well, but seems like a better selection of Dewalt stuff here so that's why I've stuck with Dewalt.

Easy out worked great, I'll figure out the bolt replacement later, all I wanted was to at least get the seats while they were still there. Got both front seats for $39, pretty good deal, one of the seats has a seat cover still on it, looked like both seats probably did at one point as they are in really good shape, a bit dirty which is easy to take care of with some cleaning. They match the interior of my B2 which is why I wanted them.
If you can rebuild a Ranger you can replace the batteries in your drill packs. I watched a youtube presentation a few years ago and it showed how to remove, test, and replace the rechargeable batteries on any drill (that uses the removable style).

Not hard at all...but it also gave me an idea on how to revive old batteries...once they hit below a certain voltage they won't charge...and you can bring them back up to the charging level with a car battery...

There is a risk of them blowing up...low but possible...but I did mine with about ten feet of wire and hid behind the tailgate...lol...it worked with no explosion...

But...I also found a complete drill and batteries at the yard sale store nearby...which was a bonus!
 

Sponsored Ad


Sponsored Ad

Staff online

Member & Vendor Upgrades

For a small yearly donation, you can support this forum and receive a 'Supporting Member' banner, or become a 'Supporting Vendor' and promote your products here. Click the banner to find out how.

Truck of The Month


Shran
April Truck of The Month

Recently Featured

Want to see your truck here? Share your photos and details in the forum.

Follow TRS On Instagram

TRS Events

25th Anniversary Sponsors

Check Out The TRS Store


Sponsored Ad


Sponsored Ad

Sponsored Ad


Amazon Deals

Top