Welcome Visitor! Please take a few seconds and djblingbling1
New Member
- Joined
- Jun 24, 2014
- Messages
- 3
- Reaction score
- 0
- Points
- 0
- Vehicle Year
- 1997
- Make / Model
- Ford
- Transmission
- Manual
I made another post about my CEL.
One was a IAC and one was misfire cyl 3. I cleaned the IAC and that code is gone for now, but I am still getting a blinking cyl 3 misfire.
Whats wierd is that I can clear the codes by disabling the battery, and it will run fine,smooth, and no codes for a while...then it comes back and its backing to no power and blinking,
PO did plugs and wires but I have not double checked gap, and I need to test coils.
Now the urgency comes from the fact that reseting it is a temp fix, does that point one way or another to what could be casing the misfire?
One was a IAC and one was misfire cyl 3. I cleaned the IAC and that code is gone for now, but I am still getting a blinking cyl 3 misfire.
Whats wierd is that I can clear the codes by disabling the battery, and it will run fine,smooth, and no codes for a while...then it comes back and its backing to no power and blinking,
PO did plugs and wires but I have not double checked gap, and I need to test coils.
Now the urgency comes from the fact that reseting it is a temp fix, does that point one way or another to what could be casing the misfire?
