Craig0320
Well-Known Member
Supporting Member
Article Contributor
V8 Engine Swap
TRS 20th Anniversary
- Joined
- Sep 21, 2017
- Messages
- 1,209
- Reaction score
- 225
- Points
- 63
- Location
- Mississppi
- Vehicle Year
- 1998
- Make / Model
- Ford
- Engine Type
- V8
- Engine Size
- 5.0
- Transmission
- Automatic
- 2WD / 4WD
- 4WD
- My credo
- Break it right the first time. Fix it better the next time.
That is some good info right there.it wont.
the 2.9 is already a hi-rise.
put a rubber plumbing cap on the tb opening...
cut hole in top and build adapter....with a tin diffuser bridge over the 3-4 port directly below the carb.
you can do this with a roll of gasket material...some sheet metel...a hack saw...drill and some hardware...maybe a lil epoxy.
bridge the high pressure pump with a fuel filter and unplug it...
if i were a carb guy....cake job.
that or put a propane carb on the throttle body and run propane.
unfortunately....it wont ever run as good as efi.
and trouble shooting mechanical issues is a completely different set of headaches.