GIJoe4500
New Member
- Joined
- Aug 7, 2007
- Messages
- 64
- Reaction score
- 0
- Points
- 0
- Age
- 38
- Location
- Moore, TX
- Vehicle Year
- 1988
- Make / Model
- Ford
- Transmission
- Manual
My ranger currently has a 2wd M5OD-R1. When I put in a 302, I want to run the 4x4 M5OD-R2 (with a tcase, obviously), so hooking up the clutch and everything will be easy.
My question is, is will I need to cut another hole in the floor for the shifter, or would I be lucky enough that the R2 shifter will come up through the same hole the R1 uses?
My question is, is will I need to cut another hole in the floor for the shifter, or would I be lucky enough that the R2 shifter will come up through the same hole the R1 uses?