I got in to the mechanic a few days back. He found a seized adjuster and a missing inspection plug.Its been cold here for the last few weeks but today is nice and mild. Tonight it is getting cold again. Hopefully it's fixed!
I have been having a problem with my 03 xlt ranger this winter. If the temperature warms up and goes above the freezing mark...then suddenly drops again the rear passenger brake is stuck on the next morning..Happened again this morning. had to put in 4x4 and put it in reverse and give it a bit...
...Had the dreaded rear end binding in my 03 xlt 4x4. Had no idea what it was...but it had been getting worse over the past few months. Slow right and left turns from a stop were rewarded with heavy binding/ vibration that I thought was coming from the front....but with the help of a buddy made...
...I have a 2003 xlt 4×4 with 245/75 16" tires. The torsion bar settings are all out of whack. Can someone give me an idea what the stock lift measurement should be from the bottom of the front lower wheel whell to the pavement should be? My truck does NOT have fender flares/ mouldings.
Thanks
I have always found that this 2003 xlt drove like a tank. I put new shocks on and it didn't help out the front much. I figured it was because I put cheap shocks on it
...A couple of days ago a buddy at work was checking things out under the truck. He said somebody cranked up the torsion bar to...
2003 ford ranger xlt 4.0. I want to buy a flowmaster super 10 cbe. Single in...dual outlet..pipes straight out to the back under the bumper. Which size inlet do I need so me and my buddy can install it ourselves...2.25 or 2.50?
Thanks
I have a 2003 ranger xlt 4x4. It has the stock 245/75 16 tires on it. I found the ride harsh from the front so I had some new Monroe shocks installed. Didn't help all.
...Buddy at work said my front torsion bars are probably cranked up. I bought the truck used last year. The front measures 34"...
...I recently picked up a rear left and right parking brake cables for my 2003 xlt 4x4 " extended cab " from a discount parts store, and they are not holding right. With the parking brake on if you apply a bit of gas the truck will lurch ahead. In guessing they gave me cables for a regular cab...
...Found a k@n intake with the maf sensor and housing attached in decent shape for $40. Retail on just the intake is $300 so it was a good find. Lost some bottom end but works better when kicking it down at 55-60 mph to pass people. Mileage is up 2 mpg as well
...Just curious who has had needed the most repairs in the their first year of ranger ownership? I bought my 03 xlt 4x4 with 70,000 miles showing back around January for $3000. Its s good thing I got it cheap because this thing has been a money pit. It had a fresh legal inspection on it but as...
Why do brake calipers cost twice as much for a 03 ranger compared to the 02 model? I see listings up to 2002....then from 2003 on. There is no way 02 calipers would fit in my 03?
Thanks
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.