The parts stores show a 161 and a 194LL. They are the same form factor but different wattages. Does anybody know which one is the factory replacement or are there both kinds in the cluster?
Please Help....
Flex Fuel vs. Non Flex Fuel........
Post your experiences and opinions regarding
1. Differences in how the two run.
2. Differences in MPG.
3. Idle Quality.
4. Engine Life.
Well I got mt truck back yesterday. A complete engine rebuild. I have been chasing a horrible idle for a year. The heads were replaced due to a catastrophic overheat and the guy a Tidewater Engine Rebuilders said they did a horrible job. Some of the worst work he has ever seen. He could shine...
Does anybody have any experience with the Ford Factory Reman engines? My 2003 needs a new engine and the dealership uses Ford remanufactured engines. They do come with a 3 year unlimited mileage warranty.
Are they as good as a Jasper Reman?
Well I have been having trouble with this truck for awhile now. I went out today and did some real troubleshooting and thinking and think it may be a bad valve.
Here is what I have now:
1. Engine runs rough at idle, but ok at highway speeds.
2. After a 15 minute warmup at idle the forward O2...
I have searched all the "Ranger" forums and I can not find any really clear instructions for replacing the CPS. I do have the allignment tool on order.
There are numerous threads detailing the woes of the CPS, but not the replacement. The ones talking about the replacement have no real detail...
How do you guys find TDC (top-dead-center) on the compression stroke for the #1 cylinder?
I do not see any timing marks on the crank pulley, or the block for that matter. I am not going to order specialty indicators that thread into the spark plug hole or anything like that. There seems to be...
What do you guys use to protect the lower door area and keep road grime from sticking like concrete? Is there a product out there for this kind of thing?
I am literally having the EXACT issue Blackedge03 was having with his 2003 Edge 3.0l.
I have a rough idle. Feels like a misfire, but I am left scratching by head. PLEASE HELP.
Here is the data and work done so far:
2003 Ford Ranger Edge 3.0l FFV 2WD with 5 speed AUTO.
1. Recent compression...
Can someone tell me the correct way to adjust the idle set screw on a 2003 3.0l Flex Fuel engine?
Lets just say mine was "adjusted" incorrectly and I need to get it back to the proper factory setting.
Autozone sells them "WITH" and WITHOUT" step on plug. The two look identical, so what is the difference. It could be a misprint as they call the part a crankshaft position sensor.
Both key fobs work on my truck, but only in a limited fashion. Sometimes they do not work at all, other times they work fine. I have tried new batteries and resetting them. It almose feels like there is sometimes interference with the remote.
Anyone know how to deal with this?
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.