I think a lot depends on the color of the truck when it comes to body rust. My 1994 is Bright Calypso green and it looks pretty good.
Noticed a lot of Rangers this color have less rust. And I live in the salt belt Mass.
BTW, I've changed just about everything on this vehicle(sometimes multiple...
I pulled the bed off my 1994 Ranger and pulled a (new )fuel pump because the gas gauge was not reading correctly.
First I tested the gauge by plugging in the old one with the pump wires detached and moving the float.
Pulled the Carter fuel pump and noticed the float under the gas. Half full...
The relay tested good.
I ended up changing out the PCM to a rebuilt and everything seems to be back to normal. Truck is running good and CEL is on at every first click key turn. I'll post if something happens in the next week. Truck is a 94 so old module.
Guessing maybe something in the PCM that...
I have 1994 Ranger 4.0 and have a strange issue with my truck starting. It cranks,has spark but the fuel pump was not running at key on.
Checked fuses and relay, all good. Pulled the bed and changed out the fuel pump. Truck started right away. But, on the 5th try the issue returned and cranking...
Hoping somebody can lead me in the right direction with this.
1994 Ford Ranger 4.0 4x4.
Earlier this week I had a crank no start issue when leaving work.
Cranked 4 times and it stated finally. Made it almost home and it died while driving. Like a kill switch was pushed...
At least 4 years since visiting.
Came on here about 2 years ago and it said the site had been compromised.
Anyways, still have the 94 Ranger. Pulled the bad last summer and chassis saved it. Just had a new exhaust system put on and 4 new tires. Maybe I'll get some pictures up if it ever stops...
Anybody ever experience a dry creaking noise that seems to come from the steering column cover?
Looks like the inside boot on the firewall is pretty messed up.
Just curious if anybody every dug in to find the problem.
1994 Ford Ranger XLT
Same guy I got the rear bumper from. This is awesome, now I can replace my rusty ole front bumper also.:headbang:
Got the valance and everything for $75.
What do yall think?
How much of a pain is it to get the old one off?
Any online places to get replacement fog lights?
This site has...
Pulled codes 1994 4.0 and got a 0136 lean bank #2.
Truck has 160K on it and O2 sensors look OEM.
I will check for vacuum hose leaks when it gets warmer out.
Might just replace the EGR as well.
I do get pinging and occasional smell like the truck is running rich.
Any suggestions would be great.
So I've been getting a CEL on my 94 that will come on and go off while driving.
I changed the fuel cap but still get it occasionally. Also get a smell of gas once in a while.
I decided to pull some codes via the CEL with a jumper on the EEC.
Code 136 or P036 a couple times while engine running...
Off the truck,brackets pad, and even the rear plate lights. Beautiful shape 1998.
Glad it was off,it's only 14 deg. today.
Anyways, wondering what would be a good product to coat the inside of it with to keep rust at bay?
My other bumper just had paper thin chrome in a couple places.
Interesting, the port at the rear of the RABS on my 94 Ranger is 11-1 mm or 7/16-24.
It had a adapter to get it to 3/8-24 for common 3/16 line.
I'm a machinist so I checked the pitch and size of the thread on the adapter.
I vaguely remember my father putting that reducer in there the first time...
My power steering started to squeal when I backed into my parking spot yesterday. Notice the fluid is way down. Topped it off,but now I'm getting a puddle under the front left of the vehicle. I seem to be having a hard time locating the leak. It's not spraying and everything looks wet...
I was checking the oil in my 94 V6 a couple weeks ago and i noticed that the tube felt loose and felt like it was going to break. I have a feeling that it is rusted through and will break off pretty soon. Is there any way to replace this? or do I need to do something else about it? thanks in advance