What is the proper name for this part that shows what gear truck is in .And where can I get one? Thanks
2006 Ranger XLT 4X4 automatic,121,000 miles,4.0.
I have an elderly friend who owns the above mentioned truck, she said she was trying to start it 3 years ago with jump starter and sparks flew from passenger side of engine compartment. now nothing happens with a new battery. I attached a new battery and dash lights came on but no sound when I...
I was once found a tutorial here on how to check the 4x4 system and control module,can someone help me find it again. I searched but didn't find it.Thanks
I have a 1994 Ranger 4x4 manual tranmission,4x4 is push button on the dash.
I have replaced the 4x4 control module.dash switch,transfer case shift motor,and the pigtail in the dash behind the 4x4 switch. 4 high works everytime with no issues but 4 low has issues still,when I engage 4 low...
I am still looking to buy another Ranger,this time I have found a 2002 4x4,auto trans,appears to be in good shape based on pics.Was this a good year for the Rangers,If anyone has any advice please share with me.Thanks
I have a 1994 Ranger 4x4 manual trans and hubs,4.0.I have been having issue off and on with the 4 wheel drive not engaging and difficulty disengaging.Mechanic says he has found the problem with the wiring in the dash behind the 4x4 dash switch.When he wiggled the wires the 4x4 would engage as...
I am looking to buy another Ranger,a 1997 one owner 4.0 auto trans 4x4 Asking to see if this was a bad year for Rangers.Any particular issues etc.Thanks
Hubs have been converted to manual.
1994 Ranger XLT 4x4 manual,4.0. I replaced the 4x4 control module from a salvage yard and it worked well several times but this morning when I started the truck the 4x4 low light was on the dash switch but the 4x4 was not engaged so after pressing the switch a few times the light went off. I...
I have 1994 Ranger 4x4 the push button hi low switch is bad I have a replacement,what is the easiest/safest way to remove the bad switch from the dash panel? Thanks
I swapped my toolbox from an 89 to a 94 Ranger and now the lid will not close properly.Can anyone provide info on how to adjust the latch?
I Googled but couldn't find anything,Thanks
Well after 10 years my 89 2.9 finally died, I have found a 2003 Ranger 4x4 xlt auto with 152,000 mikes for a replacement .Does anyone have any info pros and cons or any issues with this year model? Thanks
1989 Ranger XLT, I have 2 new headlight assembly unit to install, but before I start I am asking for advice to make the process easier,any tips,shortcuts, etc.
If anyone has replaced the entire units -please share your tips.
I have 1994 4x4 4.0 5 speed manual, I need to get new door locks and a new ignition switch. Are there sources to get these items other than the dealer? The key is not chipped.Thanks
1994 4.0 4x4 5speed manual Hubs changed to manual locking. The 4x4 works but the light on the dash will not come on,changed the dash plug in unit but still does not light up.I understand that the 4x4 module is in the kick panel and may be the problem. Where is the kick panel? I have been told...
Recently bought a 1994 Ranger x-cab 4x4 5 speed manual. The rear brakes lock up when applied,I had a mechanic check and he said the brakes were good but he couldn't turn the axle while the trans was in neutral.He said the problem was in the axle or rear end????Also the truck makes a (whump...
1994 Ford Ranger 4.0 4x4 manual trans. Flashers won't flash but all the other lights work. A new fuse didn't help. Any ideas? I searched but didn't find anything.Thanks
Hey folks I need advice Please,I have a 1989 Ranger 4x4 with factory aluminum wheels that have streaks in therm from some CLR I sprayed on them. Does anyone have any tips for cleaning them up streak free? Thanks.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.