Search results

Specifically looking for the "AFE Full Metal Power Stage 2" with the dry filter, but may settle for something else

So me and my brother are driving home from Quebec thursday night. Probably around 10:30 or so, coming home from camp near Knowlton. We're maybe 20 minutes from our exit off the 401 highway when the song "schism" comes on the radio. It was a pretty cool, considering that song is never on the...

Found a wiki page on all shift mechanisms that control timing. Should help for anyone before tearing up the transmission. http://en.wikipedia.org/wiki/Transmission_control_unit

So my ranger has developed a bad grinding noise from what sounds like coming from the front right. It will only make the sound in reverse when the wheel is turned about 85% to the right. If I turn the wheel passed 85% the grinding turns into an almost snapping noise like really nasty. Doesn't...

Are wheel spacers unsafe to use if the wheels extend past the hubs once the wheel spacers are installed?

Just wondering if anyone here uses 15 or 20w-30 for older ranger(98 or earlier). Mostly for valve and/or timing chain clatter, is it better for older engines?

Just came across this on ebay. $12 intake air temperature mod that sends a different air temperature to the ecu for richer mixture. I think my brother has one of these on his bike. Anyways does anyone have one of these I wonder if they work...

So I found out my timing chain tensioner is making all the noise that I thought was the transmission(link). It's a loud whining sound coming from the back of the engine. basically my question is, is it possible to access the timing chain without removing the whole engine? edit: So I can atleast...

Does anyone have a pic of where the vacuum modulator is on a 4.0L rwd transmission? When the truck gets hot there's a hissing noise and it shifts really bad into second gear. Anyone know where the modulator and vacuum hoses are? All I can find are two or three metal pipes on the passenger side.

Punch them right in the head!:pissedoff: And on top of that, I tried seafoam "trans tune" crap and totally screwed my transmission. Now it slams into 2nd and 3rd gear so bad and I dont have the first clue about transmissions. urg.:pissedoff::pissedoff::pissedoff:

'lol' of the day :icon_rofl: http://www.youtube.com/watch?v=d5Ch32JbWas&feature=related

Transmissions suck because I dont understand them. I JUST freakin replaced a shift solenoid 4 months ago. The cel comes back on today reads p0756 solenoid b performance, same one I replaced -150 bucks. wtf. The whole transmission is on the way out the door I swear time for a 5spd /rant grrr...

for this: http://kingston.kijiji.ca/c-cars-vehicles-cars-Dodge-DODGE-STEALTH-R-T-W0QQAdIdZ128424645 thoughts??

Upstream oxygen sensor circuit slow response driver's side...Anyone have any ideas what can cause this? I checked the wires, they're in good shape. As far as removing the the sensor goes, I'm a little shaky on getting under there with a torch right next to the fuel lines to remove it. Anything I...

Does anyone know where there's a diagram or page with all vacuum components for the 4.0 ohv? I'm trying to diagnose what I think is a vacuum leak somewhere..

Need help quick -Testing plug wires I have a job interview soon and my truck just started misfiring yesterday, especially when the engine is hot will miss at idle too. So wanted to check the wires but have no clue if I used the right settings on the ohm meter. I set the switch to 20K in the ohm...

So it being spring and all I figure I should put the ranger to good use. Just wondering if anybody here in the man with truck business? I'm thinking about putting some adds on in local classifieds and things to make a few extra bucks. As far as payment methods and things I'm just wondering if...

Effective in improving ignition/performance? Especially on a 97 I dont know how worn these can get.

So I went to a few local garages around town to do a diagnostics and all said there's a $40 fee to check the computer...wtf?:icon_confused: Anyways so I ordered up one of these on ebay for $30 yesterday but I'm getting impatient. Last week I changed the sprak plugs, drove it a couple miles it...

I found this on another site, thought I would post it here. http://www.yotatech.com/f105/sea-foam-do-you-want-truth-160613/ Okay, I am putting this in two places, and on other sites, as I don't know where it should officially go, but i want as many peeps and homies as possible to read this. I...