• Welcome Visitor! Please take a few seconds and Register for our forum. Even if you don't want to post, you can still 'Like' and react to posts.

diagnostics

  1. Loss of Power issue 01 3.0L Edge

    Hello all. This is my first post. You guys always have great advice and feedback, and I am now myself kinda stumped with something so here goes. I have a 01 Ranger Edge 3.0 (U) Gas 110k miles on the clock It will intermittently have loss of power when driving, especially so here and there when...
  2. Bgunner

    How to tell if there is a restriction in the exhaust using a vacuum gauge?

    I have read the "How To" on vacuum but it does not mention what the vacuum gauge will read and do if there is a restriction in the exhaust, like a plugged cat. What should I be looking for to tell if I have an issue with exhaust restriction? :icon_confused: current test results: Idle: 18 Hg...
  3. Bgunner

    How to tell which fuel injector is giving issues?

    Ok here's the issue and related parts replaced, due to other issues. I have an intermittent skip on my 94 3.0L which it had when I bought it and so far have tracked it down to being a fuel delivery issue and here is how: replaced coil with Accel Super Coil for a hotter spark, replaced...
  4. Bgunner

    RABS Code 4, need help figuring it out

    I have a 94 Ranger XLT super cab 4x2 with the ABS light on. I pulled the code and I get a code 4 but searching the internet I can not find a list of what the codes mean. As far as I can tell this code means "RABS valve switch closed or open dump valve." This information was taken from a 91...
  5. B2300 cannot pass emissions!!

    A
  6. DavidTC3

    94 4.0 Ranger OBD-I code 172

    I recently got my engine replaced in my ranger. After I got it back the check engine light came on. It would come on and go off. I got it scanned by the guy that replaced the engine and he said it was the o2 sensors. I replaced both of them and it still came on. Only now it stays on instead of...

Sponsored Ad


Sponsored Ad

Top