A1Stack
New Member
- Joined
- Mar 25, 2024
- Messages
- 3
- Reaction score
- 1
- Points
- 3
- Location
- Jam$ter101
- Vehicle Year
- 1987
- Make / Model
- Bronco 2
- Transmission
- Automatic
Hey guys, I have an 87 Bronco II that I purchased in non running condition. No power to fuel pumps. I was able to get them to kick on by jumping the 2 relay connectors, so I can rule out bad pumps and any wiring issues further back. I ran a voltage test on the relay plug, I’m getting the correct power and grounds on all the pins except for the pin that I believe is supposed to power on with the ignition turned on. I had my wife crank the engine while I checked for voltage, nothing. Anybody else had this problem? Could it be the ignition switch, or maybe a bad computer? Additional notes: I have replaced the relay, and the intertia switch is good.