• Welcome Visitor! Please take a few seconds and Register for our forum. Even if you don't want to post, you can still 'Like' and react to posts.

1991 2.3 Ranger, fuel pump doesn't come on


Heretic01

New Member
Joined
Aug 19, 2019
Messages
1
Reaction score
0
Points
1
Location
Florida
Vehicle Year
1991
Make / Model
Ranget
Transmission
Manual
My fuel pump doesn't come on when the key is turned on. Tested fuel pump relay, eec relay, jumpered inertia switch. Replaced fuel pump relay, fuel pump still not coming on. Jumped battery power straight to fuel pump, and the pump did not come on. Replaced fuel pumpand it is still not coming on with the key on. Many help would be appreciated
 


Tom Espo

New Member
Joined
Aug 20, 2019
Messages
1
Reaction score
1
Points
3
Location
Milwaukee
Vehicle Year
89
Make / Model
Ford Ranger
Transmission
Manual
Sounds like the old and the new pump are good but don’t come on when installed in the tank. Must be a mounting issue or nearby wiring. Do you get power at the pump connection when the key is turned on? Careful about sparks with gas fumes near.
 

gungfudan

Member
Supporting Member
Joined
Feb 22, 2011
Messages
475
Reaction score
19
Points
18
Location
Mississippi
Vehicle Year
1994
Make / Model
Mazda
Engine Type
3.0 V6
Engine Size
3.0
Transmission
Manual
2WD / 4WD
2WD
Total Lift
N/A
Total Drop
N/A
I Agree I am about to start trouble shooting the same issue when i get back on a 91'. My dad has a Ranger graveyard at his house.
 

alwaysFlOoReD

Forum Staff Member
TRS Forum Moderator
TRS Banner 2012-2015
TRS 20th Anniversary
Joined
Apr 13, 2009
Messages
13,933
Reaction score
5,086
Points
113
Location
Calgary, Canada
Vehicle Year
'91, '80, '06
Make / Model
Ford, GMC,Dodge
Engine Size
4.0,4.0,5.7
Transmission
Manual
2WD / 4WD
4WD
Edit: this is on frame rail high pressure pumps. Probably doesn't apply in your case. Frame rail pumps were used 86, 87, and maybe 88.
I've had problems with the connectors at the fuel pump not being tight enough. The connectors under the black rubber boots right beside where the fuel line connects. Now I test the pump without the wiring hooked up, as in on the bench. I found that 2 of my pumps that I thought were bad were just fine.
 

Sponsored Ad


Sponsored Ad

Members online

Today's birthdays

Member & Vendor Upgrades

For a small yearly donation, you can support this forum and receive a 'Supporting Member' banner, or become a 'Supporting Vendor' and promote your products here. Click the banner to find out how.

Truck of The Month


Shran
April Truck of The Month

Recently Featured

Want to see your truck here? Share your photos and details in the forum.

Follow TRS On Instagram

TRS Events

25th Anniversary Sponsors

Check Out The TRS Store


Sponsored Ad


Sponsored Ad

Sponsored Ad


Amazon Deals

Top