silkysix
New Member
- Joined
- Jan 10, 2009
- Messages
- 17
- Reaction score
- 0
- Points
- 1
- Transmission
- Automatic
I am back to trying to find the recurrent no-start problem in my 87 2.9L B2. It will start when cold and run well but will not re-start when hot. OBD codes are 34, 84, 87, 33.
There are two red vacuum lines that plug into the reserve vacuum tank under the air filter box. One of the red lines goes to the intake right behind the throttle body and has a t connector in the middle. On my engine, that t-connector is open. Obviously a leak. What vacuum line should attach to that t-connector?
There are two red vacuum lines that plug into the reserve vacuum tank under the air filter box. One of the red lines goes to the intake right behind the throttle body and has a t connector in the middle. On my engine, that t-connector is open. Obviously a leak. What vacuum line should attach to that t-connector?