RangerRock
Member
- Joined
- Mar 1, 2008
- Messages
- 74
- Reaction score
- 1
- Points
- 8
- Age
- 41
- Location
- Madera, Pa
- Vehicle Year
- 1992
- Make / Model
- Ford
- Engine Size
- 3.0L
- Transmission
- Manual
I still have my 92 Ranger it's been off the road for about 6 years again, due to an unfortunate close encounter with a Deer. About five years ago I had the engine out of is and replaces the crank seals and put a new oil pan on it. Upon putting the engine in I smashed my blower housing... had a non a/c one I put in from my parts Ranger. Removed the A/c component from the engine the condenser was already smashed from the deer, put it all in a box to put back in later. Found an 06 F150 I couldn't pass up, bought and the Ranger sat becoming a project. Now fast forward 5 years... my box of parts are gone guessing I must have sent them with my parts truck when I sold it (township only allows 2 unlicensed vehicles)
Now I'm working on the Ranger again ready to put A/C back in it, bought a new condenser all new lines and a new compressor, can't find compressor bolts or the harness that goes from the right fender to the low pressure switch to the compressor, the three rangers and explorer in local pick and pulls are missing the harness or are non a/c trucks.
So I'm looking into making my own harness with new pig tails from ebay or rockauto. I see there are four wires at the connector, and I believe the purple one comes from the hva/c control in the cab What are the other 3 wires for are they A/C related? The four wires are purple, red, green with orange stripe, and pink with orange stripe. (looked in the Haynes manual their colors don't seem to match what's in my truck?)
Also what size are the a/c compressor bolts?
Now I'm working on the Ranger again ready to put A/C back in it, bought a new condenser all new lines and a new compressor, can't find compressor bolts or the harness that goes from the right fender to the low pressure switch to the compressor, the three rangers and explorer in local pick and pulls are missing the harness or are non a/c trucks.
So I'm looking into making my own harness with new pig tails from ebay or rockauto. I see there are four wires at the connector, and I believe the purple one comes from the hva/c control in the cab What are the other 3 wires for are they A/C related? The four wires are purple, red, green with orange stripe, and pink with orange stripe. (looked in the Haynes manual their colors don't seem to match what's in my truck?)
Also what size are the a/c compressor bolts?