blower switch

[CopyKat]

Looked and I didn't have any used ones so I went out and got a new one. No difference. I've only got high speed and almost high speed.

Changed my fan thinking it may be the fan itself and that fan was doing the same thing.

Only other thing I can think is the actual switch itself on the control panel is not functioning properly.

So it's not always the fan control resistor.

BTW I didn't touch the coils at all with my fingers. So don't give me that line.

 

[3 of 7]

When I replaced mine, a couple of the connectors inside the plug were rusted/fried..
I replaced the plug with one from a wrecker.

 

[mjonesjr]

Just curious Joel, did you do any wire splicing when you swapped in the new style dash?

 

[CopyKat]

Just curious Joel, did you do any wire splicing when you swapped in the new style dash?

Yes and it was all working fine up untill this past spring.

 

[mjonesjr]

hmmm. The resistor is the most common problem. I would say the second most common would be the switch in the cab.