- Joined
- Nov 12, 2018
- Messages
- 1,249
- Reaction score
- 510
- Points
- 113
- Location
- Alcoa, TN
- Engine Type
- 2.8 V6
- Transmission
- Automatic
- 2WD / 4WD
- 4WD
Im having trouble getting the 2.8 in my B2 running. It seems like it wants to start, but just won't do it.
I have cleaned and rebuilt the carb. I was a little off on float adjustment, but believe i have since fixed it.
I know the fuel pump is working. It fills the carb bowl up.
So this leads me to belive that it is the ignition. I bought a new coil pack and installed it.
Still won't run.
I am going to look into timing and the distributor cap next i guess....
Any other suggestions?
The B2 has sat for about 6 or 7 years, but only has 60,000 miles on it....
EDIT: it runs! See post #58
I have cleaned and rebuilt the carb. I was a little off on float adjustment, but believe i have since fixed it.
I know the fuel pump is working. It fills the carb bowl up.
So this leads me to belive that it is the ignition. I bought a new coil pack and installed it.
Still won't run.
I am going to look into timing and the distributor cap next i guess....
Any other suggestions?
The B2 has sat for about 6 or 7 years, but only has 60,000 miles on it....
EDIT: it runs! See post #58
Last edited: