- Joined
- Sep 22, 2007
- Messages
- 12,407
- Reaction score
- 7,502
- Points
- 113
- Location
- Michigan
- Vehicle Year
- 1987
- Make / Model
- Ford
- Engine Type
- 2.9 V6
- Engine Size
- 177 CID
- Transmission
- Manual
- 2WD / 4WD
- 2WD
- My credo
- A legend to the old man, a hero to the child...
97 F250 HD (OBS)
My drivers door is hard to shut again. I had maaco replace the pins and bushings a couple years ago...the rigged it up cause the hinge holes were hogged out, the door never was quite right and now the bushings have failed...again.
How hard is it to replace the hinges themselves? It doesnt look to bad...4 bolts each but im mostly worried about A) Alignment and B) Physical door removal as far as the wireing harness goes (power locks and windows)
Input?
My drivers door is hard to shut again. I had maaco replace the pins and bushings a couple years ago...the rigged it up cause the hinge holes were hogged out, the door never was quite right and now the bushings have failed...again.
How hard is it to replace the hinges themselves? It doesnt look to bad...4 bolts each but im mostly worried about A) Alignment and B) Physical door removal as far as the wireing harness goes (power locks and windows)
Input?