lilbdfrd
New Member
- Joined
- Oct 13, 2019
- Messages
- 17
- Reaction score
- 1
- Points
- 3
- Location
- Wilcox,NE
- Vehicle Year
- 1984
- Make / Model
- Ford Bronco ii
- Transmission
- Manual
So I put a new/rebuilt distributor from the parts store in and wired in an h.e.i. module . The motor cranks but won’t start and I’m not sure what wire runs power to the coil. I have a purple wire going a few yellow wires connect to the coil plug in and a green wire to the coil plug in. Any help to get spark/ power to hei would be great