ScubaDive
New Member
- Joined
- Sep 3, 2007
- Messages
- 125
- Reaction score
- 0
- Points
- 0
- Vehicle Year
- 2008
- Make / Model
- Ford
- Transmission
- Automatic
So, long story short...
I changed the blow motor resistor, because I was only getting the hi setting. Changed and fixed issue there... I was driving the truck taking the wife for dinner and even through its cold out I turned the warm / cold mixer dial to the cold setting and hot air was still blowing out, turned to AC setting and yeah still blowing hot air, turned to MAX AC and started to cool down and felt more like ac. Now I really can't say how long its been like this other then it was ok over last summer no issues that I can recall. What could be the issue and what should I be looking at?
With the mixer dial turned to cold I would expect cold out side air to be coming from the vents but this was hot.
Any help or insight would be appreciated.
I changed the blow motor resistor, because I was only getting the hi setting. Changed and fixed issue there... I was driving the truck taking the wife for dinner and even through its cold out I turned the warm / cold mixer dial to the cold setting and hot air was still blowing out, turned to AC setting and yeah still blowing hot air, turned to MAX AC and started to cool down and felt more like ac. Now I really can't say how long its been like this other then it was ok over last summer no issues that I can recall. What could be the issue and what should I be looking at?
With the mixer dial turned to cold I would expect cold out side air to be coming from the vents but this was hot.
Any help or insight would be appreciated.