• Welcome Visitor! Please take a few seconds and Register for our forum. Even if you don't want to post, you can still 'Like' and react to posts.

Injector cleaning


88workcar

Active Member
Joined
Apr 29, 2019
Messages
194
Reaction score
48
Points
28
Location
Pierre Part La.
Vehicle Year
2001
Make / Model
Ranger XL
Transmission
Manual
Did a search, can't find what I am asking. Where do I send them to? Quite sure they are the root to the issues I currently have.
 


Dirtman

Former Middleweight Moss Fighting Champion
Joined
May 28, 2018
Messages
19,304
Reaction score
13,326
Points
113
Location
41N 75W
Vehicle Year
2009
Engine Type
2.3 (4 Cylinder)
Transmission
Automatic
2WD / 4WD
2WD
Total Lift
It's up there.
Total Drop
It's down there.
Tire Size
Round.
My credo
I poop in the furnace.
Some shops can do them while still on the car. They will just disconnect the fuel line, disable the pump and then run a cleaning solution through using air pressure. Takes 15 minutes.

If you're gonna take them off you can get DIY kits really cheap to clean them. Essentially just plug the injector into a power source with a switch and then spray carb cleaner through while pressing the button. There on amazon for less than 20 bucks.

61IGcqW2DGL._SX425_.jpg
 

88workcar

Active Member
Joined
Apr 29, 2019
Messages
194
Reaction score
48
Points
28
Location
Pierre Part La.
Vehicle Year
2001
Make / Model
Ranger XL
Transmission
Manual
I have done plenty myself, not as easy as in your picture tho. I was gunna send them just to say that they were " done right" but hell, I'll order that setup, it's easier than my old way.
 
Joined
Feb 24, 2018
Messages
79
Reaction score
29
Points
18
Location
San Marcos, Texas
Vehicle Year
2000
Make / Model
B3000
Engine Size
3.0
Transmission
Automatic
WitchHunter performance

Get a set of junkyard OEM injectors and send them in for 23 bucks apiece.

Ray
 

det107

Active Member
TRS 20th Anniversary
Joined
Mar 3, 2011
Messages
1,333
Reaction score
23
Points
38
Location
Vails Gate, NY
Vehicle Year
2002
Make / Model
Ford
Engine Size
3.0
Transmission
Manual
I buy the 91% isopropyl alcohol on sale & pour in gas tank before fill up-
 

Dirtman

Former Middleweight Moss Fighting Champion
Joined
May 28, 2018
Messages
19,304
Reaction score
13,326
Points
113
Location
41N 75W
Vehicle Year
2009
Engine Type
2.3 (4 Cylinder)
Transmission
Automatic
2WD / 4WD
2WD
Total Lift
It's up there.
Total Drop
It's down there.
Tire Size
Round.
My credo
I poop in the furnace.
You'd have to dump in a crapload of rubbing alcohol to make any difference in really cleaning the injectors. It was a good old school trick to clear water from the tank and fuel lines but modern fuel already contains 10% ethanol alcohol (way more than a bottle of isopropyl alcohol) which does the same thing.
 

det107

Active Member
TRS 20th Anniversary
Joined
Mar 3, 2011
Messages
1,333
Reaction score
23
Points
38
Location
Vails Gate, NY
Vehicle Year
2002
Make / Model
Ford
Engine Size
3.0
Transmission
Manual
...modern fuel already contains 10% ethanol alcohol
Doesn't ethanol hold water which is a no-no?
Bad for motors, boats, etc-
 

Dirtman

Former Middleweight Moss Fighting Champion
Joined
May 28, 2018
Messages
19,304
Reaction score
13,326
Points
113
Location
41N 75W
Vehicle Year
2009
Engine Type
2.3 (4 Cylinder)
Transmission
Automatic
2WD / 4WD
2WD
Total Lift
It's up there.
Total Drop
It's down there.
Tire Size
Round.
My credo
I poop in the furnace.
Yes ethanol holds water, so does isopropyl. Which is why its sold as "gas line antifreeze and water remover" aka "heet".

Alcohol binds with water (any type of alcohol. Methanol, ethanol, isopropyl) gasoline does not. So if there is water in your tank and you run 100% gasoline the water will settle to the bottom causing the fuel pump to suck pure water, or worse freeze (which is very bad lol). When alcohol binds with water in the tank it then allows it to mix with the fuel and be burnt harmlessly. Unless your buying marine or aviation fuel, your gas has 10% ethanol in it.
 
Last edited:

RangerVet

Active Member
U.S. Military - Veteran
Joined
Jan 26, 2019
Messages
101
Reaction score
34
Points
28
Location
Kingman, AZ
Vehicle Year
2005
Make / Model
FordRanger Edge
Engine Size
3.0
Transmission
Manual
My credo
From here on down it's uphill all the way!
Rebuild your injectors. Purchase a kit at NAPA. Basically you are replacing the O rings and the mesh cage that is inside the injector. Not expensive and works wonders. There are a few You Tube how-to vids to help.
 

Sponsored Ad


Sponsored Ad

Staff online

Member & Vendor Upgrades

For a small yearly donation, you can support this forum and receive a 'Supporting Member' banner, or become a 'Supporting Vendor' and promote your products here. Click the banner to find out how.

Truck of The Month


Shran
April Truck of The Month

Recently Featured

Want to see your truck here? Share your photos and details in the forum.

Follow TRS On Instagram

TRS Events

25th Anniversary Sponsors

Check Out The TRS Store


Sponsored Ad


Sponsored Ad

Sponsored Ad


Amazon Deals

Top