JOLENE_THE_RANGER
Active Member
- Joined
- Apr 20, 2018
- Messages
- 469
- Reaction score
- 202
- Points
- 43
- Location
- long beach, ca
- Vehicle Year
- 1993
- Make / Model
- ford
- Engine Size
- 4.0
- Transmission
- Automatic
so i thought i might start a build thread on my truck to post future progress and such.
the first half of this will be a build..errr...catch up if you want to call it that.
i mainly want to have a place to store pictures and such since i dont have a home computer (im using my work computer now)
so here goes nothing
started in early 2007... 2wd 1993 ranger 4.0 5 speed extended cab.
for the early stuff i sadly have no pictures. my computer crashed and lost 9 years of stuff. it was a sad day
for the front i threw some custom made stock pivot beams on it with extended radius arms. its getting 19" of travel controlled by king 3.0x 14 coilovers and king 2.0x 4 bummp stops
then made a simple swing steering system and got rid of alot of bump steer. its only getting about 3/4 of an inch of bump steer now
made and engine cage to hold the shocks and tied it into the cab through the firewall
inside the cab i put a 2" chromoly cage and tried to keep as much of the stock interior as i could to keep it as street friendly as possible.
some seats, harnesses to keep me safe
she sits on 15" wheels and 35" all terrain tires
after the first set of beams were made i ended up breaking them in half haha! so i had to re work them and made them much beefier. been on em for a few months now with no problems...fingers crossed!
cheers
the first half of this will be a build..errr...catch up if you want to call it that.
i mainly want to have a place to store pictures and such since i dont have a home computer (im using my work computer now)
so here goes nothing
started in early 2007... 2wd 1993 ranger 4.0 5 speed extended cab.
for the early stuff i sadly have no pictures. my computer crashed and lost 9 years of stuff. it was a sad day
for the front i threw some custom made stock pivot beams on it with extended radius arms. its getting 19" of travel controlled by king 3.0x 14 coilovers and king 2.0x 4 bummp stops
then made a simple swing steering system and got rid of alot of bump steer. its only getting about 3/4 of an inch of bump steer now
made and engine cage to hold the shocks and tied it into the cab through the firewall
inside the cab i put a 2" chromoly cage and tried to keep as much of the stock interior as i could to keep it as street friendly as possible.
some seats, harnesses to keep me safe
she sits on 15" wheels and 35" all terrain tires
after the first set of beams were made i ended up breaking them in half haha! so i had to re work them and made them much beefier. been on em for a few months now with no problems...fingers crossed!
cheers
Attachments
-
799.2 KB Views: 547
-
1.4 MB Views: 594
-
664.4 KB Views: 567
-
861.4 KB Views: 552
-
961.1 KB Views: 555
Last edited: