PLEASE HELP! Parts missing off my EVAP Cannister system


ebirr2711

New member
Joined
Nov 3, 2018
Messages
2
Reaction score
0
Points
1
Location
Mack, Colorado
Vehicle Year
1993
Make / Model
Ford
Transmission
Automatic
I have a 1993 2WD Ranger 4.0 with Automatic. I bought it about 6 months ago, and slowly fixing it up. My latest project was to fix the check engine light code 565 canister purge solenoid circuit fault.
It appears the previous owner has removed the Vapor Canister Purge Valve Solenoid, there are wire connectors just hanging and the vacuum tube is running straight to the canister.
And there is no line running from the canister back toward the fuel tank.

I am at a loss trying to figure out what else might be missing from this system, I can't find a parts list online of all the parts required to restore the system or photos or diagrams so I can get all the electrical and vacuum hooked up correctly.

Any help would be greatly appreciated. ebirr
 
Last edited:


Rock Auto 5% Discount Code: 173A8B749AB83C Expires: January 1, 2020

ebirr2711

New member
Joined
Nov 3, 2018
Messages
2
Reaction score
0
Points
1
Location
Mack, Colorado
Vehicle Year
1993
Make / Model
Ford
Transmission
Automatic
OK I have stumbled through this on my own, I hope to have this up and running correctly by Monday.
 


Top