• Welcome Visitor! Please take a few seconds and Register for our forum. Even if you don't want to post, you can still 'Like' and react to posts.

running like it has a cam


okietheranger

New Member
V8 Engine Swap
Joined
Feb 20, 2008
Messages
343
Reaction score
1
Points
0
Age
38
Location
santa rosa
Vehicle Year
1987
Make / Model
ford
Engine Size
5.0 HO
Transmission
Manual
after i installed my 4.0 in my 85 ranger it some what has problem, sometimes in the cold or if i just havent started it in a while it will crank and crank and crank.. so then when the beast comes to life it will run pretty ok but if i try to hold the throttle stedy the rpms surges and at idle it will kinda spit and suptter like it has a huge cam in it.. i replaced the o2 just think maybe its running way way rich which it is ( cause of my eyes buring like crazy from exhaust ) so the only other thing i can think of is i switch out the oil pressure sensor for a mechanical also switch the coolant switch for a mechanical.. i left the other sensor in the houseing i belive was for the computer not the gauge.. anywho im pretty stumped at why it does this maybe the air temp sensor in the upper plentum?:buttkick:
 


mhughes165

New Member
V8 Engine Swap
Solid Axle Swap
Joined
Oct 6, 2007
Messages
3,301
Reaction score
9
Points
0
Age
37
Vehicle Year
1987
Make / Model
Ford
Engine Size
302
Transmission
Manual
i dont recall but does the 4.0 utilize a map sensor, i know when the older ones run like they have a viscous cam it is often the culprit
 

okietheranger

New Member
V8 Engine Swap
Joined
Feb 20, 2008
Messages
343
Reaction score
1
Points
0
Age
38
Location
santa rosa
Vehicle Year
1987
Make / Model
ford
Engine Size
5.0 HO
Transmission
Manual
yeah i dont belive it has a map sensor that would of been my first questonable sensor.. it does not have a cam just idles and such like it does.. other than that what else could cause that? im all open for any sugestions!
 

BlackBII

Ranger Custom
Article Contributor
OTOTM Winner
TRS Banner 2010-2011
Truck of Month
Joined
Aug 14, 2007
Messages
7,899
Reaction score
984
Points
113
Location
UT
Vehicle Year
1989
Make / Model
Ford
Engine Type
4.0 V6
Transmission
Manual
2WD / 4WD
4WD
Total Lift
5
Tire Size
33
I'm assuming it ran fine when pulled?
 

okietheranger

New Member
V8 Engine Swap
Joined
Feb 20, 2008
Messages
343
Reaction score
1
Points
0
Age
38
Location
santa rosa
Vehicle Year
1987
Make / Model
ford
Engine Size
5.0 HO
Transmission
Manual
yes it ran fine.. i got it from my sister who wrecked the explorer.. so than i got it after she wrecked it.. everything is hooked up right the only thing i changed was the electric sending units on the oil pressure and the water changed them to mechanical
 

canyoncritter

New Member
Joined
Aug 9, 2007
Messages
1,274
Reaction score
6
Points
0
Location
San Diego
Vehicle Year
1952,1991,1992
Make / Model
Willys,Ford,Jee
Transmission
Manual
the computer need's the temp sensor so it know's to go to closed loop.


4.0L are MAF=mas airflow
 

okietheranger

New Member
V8 Engine Swap
Joined
Feb 20, 2008
Messages
343
Reaction score
1
Points
0
Age
38
Location
santa rosa
Vehicle Year
1987
Make / Model
ford
Engine Size
5.0 HO
Transmission
Manual
right but isnt there two sensors? one for the temp sensor its self and one for the computer? my thermostat houseing has 2 sensors in it.. correct me if im wrong
 

pineypower1186

November STOTM Winner
Joined
Sep 9, 2007
Messages
63
Reaction score
0
Points
0
Location
Taberancle, NJ
Vehicle Year
1983
Make / Model
Ford
Engine Size
302 C.I.D.
Transmission
Manual
just for future reference if the exhaust burns ur eyes, its running super lean.
 

Hahnsb2

New Member
TRS Banner 2010-2011
Joined
Aug 8, 2007
Messages
4,416
Reaction score
36
Points
0
Age
35
Location
Battle Ground WA
Vehicle Year
88-95
Make / Model
Ford-Dodge
Engine Size
4.0-5.2 Turbo
Transmission
Manual
right but isnt there two sensors? one for the temp sensor its self and one for the computer? my thermostat houseing has 2 sensors in it.. correct me if im wrong
Yes that is correct. It sounds like a vacuum leak to me...
 

92MiniMonster

New Member
Joined
Oct 26, 2007
Messages
138
Reaction score
0
Points
0
Location
Baltimore
Vehicle Year
1992
Make / Model
FORD
Transmission
Automatic
On the back of the plenum on the drivers side, the vacuum tube that goes straight out of the side to the, brake booster? is it? Did either end of that come off or does it have a hole in it, my brothers 4.0 runs like it has a nasty cam in it if that hose pops off. Just though id put my 2 cents in.
 

Sponsored Ad


Sponsored Ad

Members online

Today's birthdays

Member & Vendor Upgrades

For a small yearly donation, you can support this forum and receive a 'Supporting Member' banner, or become a 'Supporting Vendor' and promote your products here. Click the banner to find out how.

Truck of The Month


Mudtruggy
May Truck of The Month

Recently Featured

Want to see your truck here? Share your photos and details in the forum.

Follow TRS On Instagram

TRS Events

25th Anniversary Sponsors

Check Out The TRS Store


Sponsored Ad


Sponsored Ad

Sponsored Ad


Amazon Deals

Top