Found! Vacuum harness for '97 Ranger

[James Morse]

It's two lines and has a rubber grommet integral it looks like this. They say that one doesn't fit mine though.
If you have one should be easy to check it holds vacuum.
1998-2011 Ford Ranger Vacuum Harness F87Z19C828DA | NewAutoParts.com

 

[James Morse]

Still looking

 

[PlumCrazy]

What year truck do you have?

 

[2 bronco 11s]

I’m gonna try and go to a junk yard Saturday He has a bunch of rangers . Where goes it hook to and go to ? Wonder if an Explorer is the same ? Plenty of them too .

 

[James Morse]

What year truck do you have?

It's a '97

There are 2 tubes, the both are hooked to a connector that is at the firewall below the glove box. One goes to the reservoir and one goes to the supply side.

It looks like this one but '98 is apparently a bit different at least it says it won't fit.
1998-2011 Ford Ranger Vacuum Harness F87Z-19C828-DA | TascaParts.com

 

[PlumCrazy]

I have a few 95-97 parts trucks, let me see if they are still there/salvageable

 

[James Morse]

Did you find anything yet?

 

[PlumCrazy]

Did you find anything yet?

Yes, I have two. One is in usable condition, the other is missing the rubber elbow on the end of the gray line. Ill get pictures this evening. They appear to look just like the 98-11 you had a link for.

 

[James Morse]

Did the come out by just pulling the grommet and lines through to the inside? You should be able to block an end with a golf t and see if they hold vacuum.
Thanks.
Yes the '98 looks the same and I was tempted to get one especially at that price (under $15) but they are saying it doesn't fit '97.... maybe it does... or not. Hopefully you have a good one and it -should- definitely fit.

 

[PlumCrazy]

$25 shipped for the mint one or $20 shipped for the one with short gray line

 

[James Morse]

It sounds good at $25 for the nice one. Did you test it that both lines don't leak end-end?
If no leaks then let's do it. Thanks very much!

 

[PlumCrazy]

They don't seam to leak when I put my finger over the end and vacuum on the the other

Shoot me a PM with your address and I'll send you my PayPal info

 

[James Morse]

PM'd it sorry for delay replying.

 

[James Morse]

@stevenryan
sorry I hadn't got back to you about that sooner
I had the one on order and just needed to see if it was coming
it did and it's all fixed good now so I should be ok for a while
thanks.