Bob Ayers
New Member
- Joined
- Aug 28, 2007
- Messages
- 2,274
- Reaction score
- 16
- Points
- 0
- Location
- Durham, NC
- Vehicle Year
- 1999
- Make / Model
- Ranger
- Transmission
- Automatic
I just replaced my rear brakes today, and thought I would post some photos, showing how the hardware should
be assembled. These were taken on the passenger's side, but the front-to-back is the same on the driver's side.
I've seen several post by people on how to get their rear brakes back together, hopefully these photos will help.
The self-adjuster has the most parts, one thing to look out for, the threaded portion of the adjuster faces the front
brake shoe on both driver's and passenger's sides:
And last, but important, especially if you live where the salt the roads, put anti-seize grease on the center hub. More important
if you have aluminum alloy wheels:
be assembled. These were taken on the passenger's side, but the front-to-back is the same on the driver's side.
I've seen several post by people on how to get their rear brakes back together, hopefully these photos will help.
The self-adjuster has the most parts, one thing to look out for, the threaded portion of the adjuster faces the front
brake shoe on both driver's and passenger's sides:
And last, but important, especially if you live where the salt the roads, put anti-seize grease on the center hub. More important
if you have aluminum alloy wheels: