Ranger-Danger
New Member
- Joined
- Mar 5, 2009
- Messages
- 23
- Reaction score
- 0
- Points
- 0
- Vehicle Year
- 93'
- Make / Model
- Ford
- Transmission
- Manual
Ok so i Currently have a 93 Ford ranger 4.0 with Push Button 4x4 (electronic transfer case). And the 5th gear on my tranny went out. I just got a used tranny exact same one M50D R1 but it has the manual transfer case bolted on it.
My question is can i just switch them? Or what do i need to do? This is my first time removing and replacing a transmission and t case.
I prefer to Keep the Electronic push button. SO what do i need to do?
Any tips or tricks will help.
i know i need to seal the 3 rubber plugs and replace all gaskets. New clutch and what else should i do while the tranny is out???
Also The push button is not lighting up anymore. any ideas on that??
Cheers and Thanks alot
My question is can i just switch them? Or what do i need to do? This is my first time removing and replacing a transmission and t case.
I prefer to Keep the Electronic push button. SO what do i need to do?
Any tips or tricks will help.
i know i need to seal the 3 rubber plugs and replace all gaskets. New clutch and what else should i do while the tranny is out???
Also The push button is not lighting up anymore. any ideas on that??
Cheers and Thanks alot
Last edited: