Everzone
New Member
- Joined
- Apr 13, 2010
- Messages
- 2
- Reaction score
- 0
- Points
- 0
- Vehicle Year
- 1999
- Make / Model
- Ford
- Transmission
- Automatic
I have a 99 XLT EX Cab 2WD with the 3.0 Flex eng. I am about to completely rebuild the front end and want to replace the coil springs. I don't want to lift or lower the truck but I do want to make sure that i get no "ranger Sag" I have already replaced the rear leaf springs with much heaver duty springs and am about to replace ALL of the front end. Upper and lower ball joints, tie rod ends, new stronger sway bar, upper control arms, sway bar links, bushings, ect, EVERYTHING. and new springs. After looking online it looks like I am going to go with MOOG for the springs. When i look at the springs i find several different part numbers for springs for my year that cover both my engine and the 4.0 Any one know what springs will work best for me ?? I only drive the truck on the road and just want a good every day driver. When i am done I will replace all the shocks with either Edelbrock or Bilsten depending on what i find the best deal on.