Dirtman
Former Middleweight Moss Fighting Champion
- Joined
- May 28, 2018
- Messages
- 19,304
- Reaction score
- 13,326
- Points
- 113
- Location
- 41N 75W
- Vehicle Year
- 2009
- Engine Type
- 2.3 (4 Cylinder)
- Transmission
- Automatic
- 2WD / 4WD
- 2WD
- Total Lift
- It's up there.
- Total Drop
- It's down there.
- Tire Size
- Round.
- My credo
- I poop in the furnace.
Ok this one has me stumped. The column shifter on my truck has gotten really hard to move lately, figured it was a bad bushing in the tube so I tore the dash apart but found no issues. I disconnected the shift cable at the transmission and the shifter and cable move free and easy. It's the shift lever on the transmission itself that is hard to move.
Any ideas what would cause this? There is no external visible reason for it to be so hard to operate so I wanted to know if anyone experienced this issue before I drop the pan to look for an internal issue.
Any ideas what would cause this? There is no external visible reason for it to be so hard to operate so I wanted to know if anyone experienced this issue before I drop the pan to look for an internal issue.