• Welcome Visitor! Please take a few seconds and Register for our forum. Even if you don't want to post, you can still 'Like' and react to posts.

aluminum brazing rod?


metalmacguyver

Yeah, I built that.
OTOTM Winner
Joined
Sep 4, 2007
Messages
3,814
Reaction score
11
Points
38
Age
36
Location
Plymouth MA home, Buzzards Bay MA
Vehicle Year
1997, 1994
Make / Model
Ford
Engine Size
4.0, 7.3
Transmission
Manual
anyone out there ever try it? it is sold under a bunch of different names. its as simple as soldering with a propane torch. thanks.
 


smokey

Member
Joined
Aug 7, 2007
Messages
330
Reaction score
2
Points
18
Location
Maryland
Vehicle Year
1994
1985
198
Make / Model
Ford
Ford
For
Transmission
Automatic
yep i have them. I used them for a lot of different things.
Just like brazing with a oxy/act torch just a different metal in the rod.
You can use a propane torch but Mapp works much better unless you have a hot head propane torch.
they are OK for some things others not so good. Main thing is the metal has to be clean with these rods.
 

Bill G

Active Member
RBV's on Boost
Joined
Nov 28, 2001
Messages
10,828
Reaction score
4
Points
38
Age
56
Location
A $20 fuel surcharge from Tucson
Vehicle Year
1992
1984
Make / Model
Ford
Engine Size
2.3, 2.8
Transmission
Manual
I have also used some. Make sure you use a stainless steel brush to clean the aluminum when you are going to solder. It does take some practice so make sure you order extra to practice with.
 

Capt Jay

New Member
V8 Engine Swap
Solid Axle Swap
Joined
Aug 10, 2007
Messages
1,741
Reaction score
25
Points
0
Location
Minnesota
Vehicle Year
'93 body.
Make / Model
Ford(ish)
Engine Size
302
Transmission
Automatic
Don't expect it to be strong or last very long, but they do kind of work, sorta.
 

85_Ranger4x4

Forum Staff Member
TRS Event Staff
TRS Forum Moderator
Article Contributor
V8 Engine Swap
OTOTM Winner
TRS Banner 2010-2011
TRS 20th Anniversary
VAGABOND
TRS Event Participant
Joined
Aug 7, 2007
Messages
32,318
Reaction score
17,774
Points
113
Location
SW Iowa
Vehicle Year
1985
Make / Model
Ford
Engine Type
V8
Engine Size
5.0
Transmission
Manual
What is the advantage to using it then?
 

cr_the_machinist

New Member
Supporting Member
Joined
Nov 23, 2007
Messages
486
Reaction score
2
Points
0
Age
36
Location
Dexter, Michigan
Vehicle Year
1999
Make / Model
Ford
Engine Size
4.0L OHV
Transmission
Automatic
They're an easy quick fix. You don't need a whole GTAW set up to repair aluminum parts but you are better off waiting to TIG it so you'll have a stronger, more durable joint.
 

ZMan

Forum Staff Member
TRS Forum Moderator
MTOTM Winner
TRS Event Participant
Joined
Jan 5, 2003
Messages
3,778
Reaction score
406
Points
83
Age
38
Location
Medina, Ohio
Vehicle Year
1992,1994
Make / Model
Ford Rangers
Engine Type
4.0 V6
Transmission
Manual
2WD / 4WD
2WD
Total Drop
4/4, bagged
brazing is done with brass. This would be considered gas welding, much different because you're actually welding the metal together. Brazing is kinda like just putting glue on it..
 

cr_the_machinist

New Member
Supporting Member
Joined
Nov 23, 2007
Messages
486
Reaction score
2
Points
0
Age
36
Location
Dexter, Michigan
Vehicle Year
1999
Make / Model
Ford
Engine Size
4.0L OHV
Transmission
Automatic
I forget exactly what it is, Aluminiod rod, something like that. Basically soldiering it. They use it to repair boat props and radiators, because of it's ability to build up from the initial base metal. Gas welding aluminum is more frustrating than your girl-friend going through "her time of the month". I'll only Tig aluminum. It's not like steel where the oxide coating has a lower melting temperature. Aluminum Oxide has a higher melting temperature, than the base metal aluminum, which must be removed before welding.
 

ZMan

Forum Staff Member
TRS Forum Moderator
MTOTM Winner
TRS Event Participant
Joined
Jan 5, 2003
Messages
3,778
Reaction score
406
Points
83
Age
38
Location
Medina, Ohio
Vehicle Year
1992,1994
Make / Model
Ford Rangers
Engine Type
4.0 V6
Transmission
Manual
2WD / 4WD
2WD
Total Drop
4/4, bagged
I forget exactly what it is, Aluminiod rod, something like that. Basically soldiering it. They use it to repair boat props and radiators, because of it's ability to build up from the initial base metal. Gas welding aluminum is more frustrating than your girl-friend going through "her time of the month". I'll only Tig aluminum. It's not like steel where the oxide coating has a lower melting temperature. Aluminum Oxide has a higher melting temperature, than the base metal aluminum, which must be removed before welding.
I see, I figured we were talking about gas welding aluminum. Since its solder wouldn't it have a certain % of lead in it?
 

smokey

Member
Joined
Aug 7, 2007
Messages
330
Reaction score
2
Points
18
Location
Maryland
Vehicle Year
1994
1985
198
Make / Model
Ford
Ford
For
Transmission
Automatic
that's the ones i have. I have about 4 pounds of them. They are tough the repaired area is way stronger than the other metal.
 

Capt Jay

New Member
V8 Engine Swap
Solid Axle Swap
Joined
Aug 10, 2007
Messages
1,741
Reaction score
25
Points
0
Location
Minnesota
Vehicle Year
'93 body.
Make / Model
Ford(ish)
Engine Size
302
Transmission
Automatic
brazing is done with brass. This would be considered gas welding, much different because you're actually welding the metal together. Brazing is kinda like just putting glue on it..
NO, brazing is no done solely with brass. Brazing is a process whereby a non-ferrous filler metal ( no iron, "FE" on the periodic table ) or alloy is heated and bonds two or more close-fitting parts by capillary action.

So the rods braze the aluminum pieces together. You do not melt the part that is being mended so it is NOT gas welding.

Jay
 

metalmacguyver

Yeah, I built that.
OTOTM Winner
Joined
Sep 4, 2007
Messages
3,814
Reaction score
11
Points
38
Age
36
Location
Plymouth MA home, Buzzards Bay MA
Vehicle Year
1997, 1994
Make / Model
Ford
Engine Size
4.0, 7.3
Transmission
Manual
NO, brazing is no done solely with brass. Brazing is a process whereby a non-ferrous filler metal ( no iron, "FE" on the periodic table ) or alloy is heated and bonds two or more close-fitting parts by capillary action.

Jay
or other words, brazing is the process, it does not mean exclusively for brass rod though.


thanks for the input.
 

Sponsored Ad


Sponsored Ad

Staff online

Today's birthdays

Member & Vendor Upgrades

For a small yearly donation, you can support this forum and receive a 'Supporting Member' banner, or become a 'Supporting Vendor' and promote your products here. Click the banner to find out how.

Latest posts

Truck of The Month


Shran
April Truck of The Month

Recently Featured

Want to see your truck here? Share your photos and details in the forum.

Follow TRS On Instagram

TRS Events

25th Anniversary Sponsors

Check Out The TRS Store


Sponsored Ad


Sponsored Ad

Sponsored Ad


Amazon Deals

Top