np24
New Member
- Joined
- Aug 15, 2007
- Messages
- 125
- Reaction score
- 0
- Points
- 0
- Location
- Derby, Ct
- Vehicle Year
- 1997
- Make / Model
- Ford
- Engine Size
- 4.0L
- Transmission
- Manual
I have a m5od with a bw1350. I bought a shifter from someone on here that was for a bw1354, a straight bar rather that a bent bar. I traded that one for one that was supposed to be for a bw1350. it bolts up, but the bar is about 1/2" too short. In 4hi, it lines up, but as soon as you push it forward for 2hi, it pops off of the linkage on the t-case.
Also, if I get it lined up and pull it all the way back, 4low position, the shifter sits just a lil back from neutral, not in the 4low spot.
Does anyone know what this shifter could be off of?
Thanks
Nick
Also, if I get it lined up and pull it all the way back, 4low position, the shifter sits just a lil back from neutral, not in the 4low spot.
Does anyone know what this shifter could be off of?
Thanks
Nick