• Welcome Visitor! Please take a few seconds and Register for our forum. Even if you don't want to post, you can still 'Like' and react to posts.

Help Wiring Ignition Switch 1985 f150


ylidk

Member
Joined
Jul 16, 2018
Messages
47
Reaction score
7
Points
8
Location
KS
Vehicle Year
1991
Make / Model
Ford
Engine Size
2.3l L4
Transmission
Manual
Hey all, I've been fighting with some wiring here and want to get some feedback. So the situation here is the ignition cylinder is jammed, and I haven't had luck of removing it to install a new one. Even if I did manage that, the actuator rod is missing, though I could shape a small rod to take the place of it. Instead, I decided I would force the ignition switch into the RUN position at all times, and wire in a starter button as well as cut the battery wires going to the OEM switch, and wire an aftermarket ignition switch to the battery wires. The hot end of the battery wire to the BAT terminal of the Aftermarket switch, and the battery wire going to the OEM Switch to the RUN position on the Aftermarket switch. That would give me something like this drawing, I believe:

Start Switch.jpg

Does anyone see any faults with this? I wired it up this way just last night and the lights wouldn't come on and the truck wouldn't start. Maybe I just put the battery cables on too loose and there wasn't a good connection, because this seemed like it would work to me. Thanks!
jgalley is online now Report Post
 


ericbphoto

Overlander in development
TRS Event Staff
TRS Forum Moderator
Supporting Member
U.S. Military - Veteran
TRS 20th Anniversary
VAGABOND
TRS Event Participant
GMRS Radio License
Joined
Feb 7, 2016
Messages
15,200
Reaction score
16,337
Points
113
Age
59
Location
Wellford, SC
Vehicle Year
1993
Make / Model
Ford Ranger
Engine Type
3.0 V6
Engine Size
3.0L
Transmission
Manual
2WD / 4WD
4WD
Total Lift
6"
Tire Size
35"
My credo
In theory, theory and practice are the same. In practice, they are different.
If I understand you correctly, it sounds like your idea should work. Once you put the ignition switch in the run position, you will want to find a way to keep it from slipping out of position.

Looking at this diagram (upper right corner), it appears that there is some minor function in the ABS and instrument cluster that is normally grounded when you turn the key to "start". Without a lot more digging, I'm not sure how important that is. It may just be a lamp test function.
 
Last edited:

RonD

Official TRS AI
TRS Technical Advisor
Joined
Jun 2, 2012
Messages
25,290
Reaction score
8,290
Points
113
Location
canada
Vehicle Year
1994
Make / Model
Ford
Transmission
Manual
Can you pull the wiring connector off the ignition switch?
Maybe install a new switch and rig it so you can select OFF, RUN and START

Generally there is just one FUSED 12volt wire from the engine bay to the ignition switch, but it may be connected to 2 or 3 places on the switch

And generally there are 3 to 4 12v OUT wires on the switch.
1 wire will be ACC power, only radio and inside lights have power, no dash warning lights, no engine 12v power.
RUN will have a few wires and including ACC wire, engine 12v power and dash lights

START position often disconnected ACC and Dash power, leaving only engine power, giving full battery power for starter motor.
START position in 1985 may also bypass Coil Power resistor, giving Coil a hotter spark for cold engine startup.
Installing a STARTER Button for use in RUN position will work but won't give you the hotter spark for cold morning, which may or may not matter, and can be dealt with if it does

Brake lights shouldn't run thru ignition switch?
Neither should head lights

These were powered separately using different FUSED wires
 
Last edited:

Sponsored Ad


Sponsored Ad

Members online

Member & Vendor Upgrades

For a small yearly donation, you can support this forum and receive a 'Supporting Member' banner, or become a 'Supporting Vendor' and promote your products here. Click the banner to find out how.

Truck of The Month


Kirby N.
March Truck of The Month

Recently Featured

Want to see your truck here? Share your photos and details in the forum.

Follow TRS On Instagram

TRS Events

25th Anniversary Sponsors

Check Out The TRS Store


Sponsored Ad


Sponsored Ad

Sponsored Ad


Amazon Deals

Top