94firstranger
New Member
- Joined
- Jan 19, 2018
- Messages
- 19
- Reaction score
- 0
- Points
- 1
- Location
- TN
- Vehicle Year
- 1994
- Make / Model
- Ford
- Engine Size
- 4.0
- Transmission
- Automatic
Al,
I have a 1994 Ranger XLT 4.0L 4x4 with an A4LD and electric shift 4x4. I want to swap to an M5R1 when the A4LD dies and am gathering parts. I have 2 questions about swapping the computer:
1) Are there 4x4-specific computers, or does the computer just need to come from a '94 4.0L Ranger w/ a manual (meaning 2WD or 4x4 is irrelevant)?
2) Does the computer care what transfer case I have? Will likely go to a manual BW-1354 when the transmission gets swapped. Will my "4x4" light still work?
3) What is EEC-IV wiring? I am looking at a computer from a '94 4.0L manual and it says it "Should be compatible with pre '95 4.0L Rangers with eec-iv wiring."
Thank you!
I have a 1994 Ranger XLT 4.0L 4x4 with an A4LD and electric shift 4x4. I want to swap to an M5R1 when the A4LD dies and am gathering parts. I have 2 questions about swapping the computer:
1) Are there 4x4-specific computers, or does the computer just need to come from a '94 4.0L Ranger w/ a manual (meaning 2WD or 4x4 is irrelevant)?
2) Does the computer care what transfer case I have? Will likely go to a manual BW-1354 when the transmission gets swapped. Will my "4x4" light still work?
3) What is EEC-IV wiring? I am looking at a computer from a '94 4.0L manual and it says it "Should be compatible with pre '95 4.0L Rangers with eec-iv wiring."
Thank you!