The
older Rangers had a real problem with moisture entering the headlight
and causing this ugly yellow headlight syndrome as I like to call it.
See the headlight below? Notice the ugly yellow tint and moisture
clinging to the inside? Here is how I fixed it...
Besides
the dang wrong corners (got the Euro ones by accident off Ebay - new
ones are on now!), this turned out great. Simply drill 2 small holes
in the headlight where the arrows are, and watch the water pour out.
Once you are done, take some 3M polishing compound or some good
wax/cleaner and hit the outside of the light. Should make it bright and
clear!
For
those offroaders that are concerned about water intrusion after the
holes, complete the fix, then glue the holes back shut. Once the
headlight begins to yellow and collect moisture, drill through the glue
and repeat.
Hope
this helps....
